The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Routing of emergency brake cables (https://67-72chevytrucks.com/vboard/showthread.php?t=105319)

68jimmy 05-23-2004 09:52 PM

Routing of emergency brake cables
 
My 68 gmc came originally with a manual trans behind the v6. I have removed the bellhousing crossmember and installed an auto crossmember. Do the cables for the emergency brakes route under or through/over the auto crossmember?

It would appear that there would be too much interference if they ran under... I figured I better check to be sure.

thanks in advance!
:gmc:

flip66 05-24-2004 05:40 PM

do not know if it well help but there pictures of the routing for a TH400 in this thread.

http://67-72chevytrucks.com/vboard/s...d.php3?t=96923

adamls 05-24-2004 05:47 PM

Anyone ever seen a way to apply the brakes and then lock the hydraulics, that is how my 4 wheeler works. That would be good E-Brake without all the cables and can you get a truck inspected without e-brakes.

flip66 05-24-2004 06:00 PM

Will not pass in TX on my 69 they were not adjusted right and would not hold if you gave it gas they faild me I had to adjust it. It may have been the place that inspected it though.


All times are GMT -4. The time now is 06:59 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com