Fuse block removal
 

Hello everyone, I have just purchased a 67 shortbed with horrid wiring, in fact, there are 3 different ways to start the truck, (two buttons and one key start ignition switch). I am trying to pull out my fuse block, and am unable to remove it. I have removed the two screws from the inside, but can't figure out how to remove the part potruding through the firewall. Can anyone help me with this?? Thanks in advance!

fuse block
 

There should be a bolt on the connecter under the hood going into the cab take it out and you should have no problem. if there isn't a bolt there then they may have glued it. :flag: :flag:

Ya, check the bolt its a 7/16. Then just wiggle the connection and it should come apart.

I think it must be glued, I can see where the bolt went, but there is no bolt, I'll try to pry it apart and see what happens

re
 

be careful, don't break it............