The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   drag racers, what gears, tires, and trans u run? (https://67-72chevytrucks.com/vboard/showthread.php?t=111497)

71Rat 07-12-2004 08:52 PM

drag racers, what gears, tires, and trans u run?
 
Hey for all of you who drag race on a weekly basis and do it seriously i was wondering what gears tires and trans you are running in your truck? and if you have pictures of yourself racing your truck that would be great also, because we all love pic's of trucks


Thanks
Rat

LUV2XCLR8 07-12-2004 09:15 PM

No Pic's, I Sold The Truck, Sorry, Mine Was Not A Bad Ass Truck But
I Still Raced It Weekly, Sbc 400 4-bolt / 2 Speed Powerglide / 3:73
Posi Gears / Hoosier Quick Time D.o.t. Street Slicks 29 X 10.5's And
She Ran 9.556 In The 1/8 Around 72 Mph / Stock Heads & Valve Train.

bigjimzlll 07-12-2004 09:22 PM

my 67 long bed has a custom manual th350 and a 12 bolt with 4.56 gears. The tires are 28x13.5x15 mickey thompson et streets. with the 355 in it, it would go 12.20s on the motor and 11.60's on N20. Im putting together the new 406 this week...it has dart 230/2.08-1.625 with 52cc chambers. It has 13-1 cr and a big solid roller. Im hoping for 11s on the motor and 10s with N20. My puter crashed, so I have no pics

383 Stroker 07-12-2004 09:53 PM

4 Attachment(s)
I have 3.73 gear, TH350 and 28x9 slicks. 7.64 @89mph with 150hp shot. Here's a few pictures.

browndawg71 07-12-2004 11:00 PM

3.73 gears, 28x14.50x15 hoosiers, th-350, 3500stall, 468 ,oval ports vic jr intake,1000cfm hp series double pumper,200 shot nos (not naaws) in 3800lb truck=7.70@90on pump gas,6.80@100 on spray on pump gas.

71Dragtruck 07-13-2004 02:41 AM

71 GMC long box, 40 over 396 with everything full roller, port polish, bla bla, 519hp, 510lbs. torq on motor. 150-200 shot of NOS coming. Turbo 350 stage 2 shift going in for the full race workover, not sure if I'll go full manual. 3800 stall, 12 bolt Richmond 4:10's Eaton posi, Moser axels, Strange cover with bearing and axel supports. Hoosier QT Pros 28-14.5-15's. The rest of my parts came in today, going to a Strange 3-link with Strange coil overs. Getting rid of all the stock rear cross members tranny back and putting in tubular members. Built drive shaft 1350 series, likely 4" tube. Don't have any recent pics or times, if there is a GOD at least a 11.99 1/4 mile will take place, and a roll cage will be added. If not NOS will increase till time is achived, or 540ci will be used. ;)


All times are GMT -4. The time now is 04:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com