drag racers, what gears, tires, and trans u run? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71Rat · 07-12-2004, 08:52 PM

Hey for all of you who drag race on a weekly basis and do it seriously i was wondering what gears tires and trans you are running in your truck? and if you have pictures of yourself racing your truck that would be great also, because we all love pic's of trucks

Thanks
Rat

LUV2XCLR8 · 07-12-2004, 09:15 PM

No Pic's, I Sold The Truck, Sorry, Mine Was Not A Bad Ass Truck But
I Still Raced It Weekly, Sbc 400 4-bolt / 2 Speed Powerglide / 3:73
Posi Gears / Hoosier Quick Time D.o.t. Street Slicks 29 X 10.5's And
She Ran 9.556 In The 1/8 Around 72 Mph / Stock Heads & Valve Train.

bigjimzlll · 07-12-2004, 09:22 PM

my 67 long bed has a custom manual th350 and a 12 bolt with 4.56 gears. The tires are 28x13.5x15 mickey thompson et streets. with the 355 in it, it would go 12.20s on the motor and 11.60's on N20. Im putting together the new 406 this week...it has dart 230/2.08-1.625 with 52cc chambers. It has 13-1 cr and a big solid roller. Im hoping for 11s on the motor and 10s with N20. My puter crashed, so I have no pics

383 Stroker · 07-12-2004, 09:53 PM

I have 3.73 gear, TH350 and 28x9 slicks. 7.64 @89mph with 150hp shot. Here's a few pictures.

browndawg71 · 07-12-2004, 11:00 PM

3.73 gears, 28x14.50x15 hoosiers, th-350, 3500stall, 468 ,oval ports vic jr intake,1000cfm hp series double pumper,200 shot nos (not naaws) in 3800lb truck=7.70@90on pump gas,6.80@100 on spray on pump gas.

71Dragtruck · 07-13-2004, 02:41 AM

71 GMC long box, 40 over 396 with everything full roller, port polish, bla bla, 519hp, 510lbs. torq on motor. 150-200 shot of NOS coming. Turbo 350 stage 2 shift going in for the full race workover, not sure if I'll go full manual. 3800 stall, 12 bolt Richmond 4:10's Eaton posi, Moser axels, Strange cover with bearing and axel supports. Hoosier QT Pros 28-14.5-15's. The rest of my parts came in today, going to a Strange 3-link with Strange coil overs. Getting rid of all the stock rear cross members tranny back and putting in tubular members. Built drive shaft 1350 series, likely 4" tube. Don't have any recent pics or times, if there is a GOD at least a 11.99 1/4 mile will take place, and a roll cage will be added. If not NOS will increase till time is achived, or 540ci will be used.

07-12-2004, 08:52 PM	#1
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	drag racers, what gears, tires, and trans u run? Hey for all of you who drag race on a weekly basis and do it seriously i was wondering what gears tires and trans you are running in your truck? and if you have pictures of yourself racing your truck that would be great also, because we all love pic's of trucks Thanks Rat __________________ Modify everything, leave nothing alone!~

07-12-2004, 09:15 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	No Pic's, I Sold The Truck, Sorry, Mine Was Not A Bad Ass Truck But I Still Raced It Weekly, Sbc 400 4-bolt / 2 Speed Powerglide / 3:73 Posi Gears / Hoosier Quick Time D.o.t. Street Slicks 29 X 10.5's And She Ran 9.556 In The 1/8 Around 72 Mph / Stock Heads & Valve Train. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-12-2004, 09:22 PM	#3
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	my 67 long bed has a custom manual th350 and a 12 bolt with 4.56 gears. The tires are 28x13.5x15 mickey thompson et streets. with the 355 in it, it would go 12.20s on the motor and 11.60's on N20. Im putting together the new 406 this week...it has dart 230/2.08-1.625 with 52cc chambers. It has 13-1 cr and a big solid roller. Im hoping for 11s on the motor and 10s with N20. My puter crashed, so I have no pics __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

07-12-2004, 09:53 PM	#4
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	I have 3.73 gear, TH350 and 28x9 slicks. 7.64 @89mph with 150hp shot. Here's a few pictures. Attached Images __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear Last edited by 383 Stroker; 07-12-2004 at 11:23 PM.

07-12-2004, 11:00 PM	#5
browndawg71 Registered User Join Date: Jun 2004 Location: paris, texas Posts: 235	3.73 gears, 28x14.50x15 hoosiers, th-350, 3500stall, 468 ,oval ports vic jr intake,1000cfm hp series double pumper,200 shot nos (not naaws) in 3800lb truck=7.70@90on pump gas,6.80@100 on spray on pump gas.

07-13-2004, 02:41 AM	#6
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	71 GMC long box, 40 over 396 with everything full roller, port polish, bla bla, 519hp, 510lbs. torq on motor. 150-200 shot of NOS coming. Turbo 350 stage 2 shift going in for the full race workover, not sure if I'll go full manual. 3800 stall, 12 bolt Richmond 4:10's Eaton posi, Moser axels, Strange cover with bearing and axel supports. Hoosier QT Pros 28-14.5-15's. The rest of my parts came in today, going to a Strange 3-link with Strange coil overs. Getting rid of all the stock rear cross members tranny back and putting in tubular members. Built drive shaft 1350 series, likely 4" tube. Don't have any recent pics or times, if there is a GOD at least a 11.99 1/4 mile will take place, and a roll cage will be added. If not NOS will increase till time is achived, or 540ci will be used.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.