The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   serpentime belt set up Question (https://67-72chevytrucks.com/vboard/showthread.php?t=118146)

1968GMC 09-02-2004 10:21 AM

serpentime belt set up Question
 
I know I need a water pump for this set up but someone told me l need an alternator also. Is this true?

neonlarry 09-02-2004 10:59 AM

yup, and a p/s pump, and a fan, all the pulleys, etc. Pretty much everything from the donor vehicle. A/c delete pulleys are really hard to find if you arent going to run a/c in your truck too.

MIKE'67 09-02-2004 11:40 AM

You will need a reverse flow water pump as the serpentine system causes the pump to run the opposite way. Your local NAPA parts delaer can help you out with this.

Longhorn Man 09-02-2004 07:49 PM

And make sure to remember what the parts came off of, that way when you get replacement parts...say a water pump, you just tell them it is off a 92 S-10 blazer with the 4.3....or what ever you pull it all off of.

kwmech 09-02-2004 09:31 PM

Does not matter which way an alternator spins, or mounts. You will need the correct pulley though which can be swapped onto your alternator, but now would be the time to upgrade to an internal reg if you haven't already.

neonlarry 09-03-2004 12:02 AM

The old alternators dont really fit into the new brackets... Its way eaiser to get one off of the truck or car the other stuff comes off of. If you are lucky you can even find the bracket that fits the cs144 alternator. :)


All times are GMT -4. The time now is 04:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com