WTB:250 power steering pump bracket
 

Need a power steering pump mount bracket, I have just gotten one but it seems to be for a newer integrated head, it is close but no cigar. Any out there for the original 250 in a 70? Thanks, Brian

Any Pics of an installed unit as well? Thinkin about upgrading my '66 and I'd like to know where the alternator goes.

Piper

I think the alt stays where it is, & the p/s pump bracket has the slot for alt adjustment. Still hunting a bracket setup, I have found the pulleys & a box. Brian

here's a pic, not for sale

Hmmmmm. CPNE's setup uses a combination of later model (wider spacing on the bottom crank pulley grooves) and other pump setup, which is running off one belt. The original had two belts and close together.
Here are three setups that I have put together that fit our closer/original crank pulley. You may still have to run one belt or two depending on which pulley groove you use. These were checked on a 70 250 pu engine.
http://67-72chevytrucks.com/vboard/s...hreadid=108987

Pickmup, you still have those setups? I got some double groove pulleys Monday. Need the bracketry, this thing is a monster to steer, either I'm getting old or the 35 y/o ball joints are stiff, maybe its the radials. Brian

Yup! Take your pick.

I'll take the one on the left in photo, it has the same style bolt on pulley as the double pulley I picked up. How do you need paid? Brian

PayPal, Visa/MC, MO---Trade for 3/4T 4X4 front hupcaps ;)

Frank's PICKMUPS
1516 46th Ave. N.E.
Olympia, WA 98506
(360) 956-7170
frankeham@comcast.net

Frank, you have mail, thanks, Brian