78 3/4 ton for parts
 

this is for parts i thought sumbody might want sumthing off of it before i crush it ! no shiping on larger parts such as complete axles and stuff like that, you name the part i will see if it is there and good or not and a price if it is there and good
http://www.imagestation.com/picture/...9/f694138b.jpg
http://www.imagestation.com/picture/...d/f6941369.jpg

How about the dash clock and wiring for it, a shift indicator if it is there, and am needing fender emblems from a blazer. And a passenger amber front turn signal lens if not broke. Chrome trim not important.

Tommy

I sent you a pm about the whole truck or the axles and sm465/np205. Got any driveshafts with that. Hows the rust on the frame?

i am sure i got those i will look in the morning for them and give ya a price then . what year blazer emblems you want ?

the frame is good ( i think will look in the morning )the truck was a auto truck , the only sm465 and np205 i got has the adapter busted on it and no shifter for the 205 and i dont have the driveshafts for that truck i will also have to look at the axles to see what gear is in there so it will be noon or so tommarow

parts
 

Looking for both 73-80 & 81-87 ones. I had a few ppl write me and asked me to keep my eyes open for them.

Let me know what you got and I can look at my list.

Thanks
Tommy Davis

i got these but the tabs are broke off i used 3m 2sided tape to hold them on till i parted the blazer. and i think i got the other kind too sum where i have to look
http://www.imagestation.com/picture/...1/f6933da3.jpg

I will write the guy and ask him if it is ok that the studs are broke off.

Let me know condition of the other ones. If you also have the cheyenne rear quarter emblems for the 73-80 blazer, let me know and I will also pass that on.

What kind of dash emblem did it have?

Tommy

junkyardpartseeker here is the other blazer fender emblems i got here i havent had time to get to the other lot to look for the clock and wireing ,shift indicator ,pass front amber signal lens , yet but i will later today http://www.imagestation.com/picture/...7/f6923c24.jpg
http://www.imagestation.com/picture/...0/f6923c35.jpg

I have the longbed driveshafts
 

I have the shafts out of a 79 long bed.4x4 If you want the whole truck clarkj i could help get it your way some. If thats o.k. with tnblazerk5.

thats fine with me, clarkjw24 its up to you if you want it or not

how much for the column minus the steering wheel shipped to 08879 in south amboy NJ?

sorry for the late responce i just got to the other lot today

juckyardpartseeker i looked for the cheyenne emblems and i dont have them and the amber lens was busted and there wasnt a dash emblem and no clock but there is a wireing there will have to look at the wiring in the day got dark on me there sorry

rolson039 i got a tilt auto one in a blazer at the other lot will look at it tomarrow and see if its all there then give ya a price

http://www.imagestation.com/picture/...1/f68bceaf.jpg

here a pic of it. its lose and need tighted or a kit put in it you still want it ?

i got more parts on the 73+blazer board sum parts will work on the trucks too

still for sale

this is geting the choped this weekend too last chance on parts

How much for just the axles ?

by axles you mean? complete front and rear ends ? or just the axles out of them ?

speedo cable from a 465/205? good shape? working.....an how much to 97520??
thanks a lot!
-Devil

no speedo cable sorry

Pitman arm... How much?
Brandon

I'm looking for the complete axle setup, front and rear.

pm sent

sorry didnt see this one, i might have another one at the yard i look tommarow