78 3/4 ton for parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tnblazerk5** · 10-19-2004, 08:45 PM

this is for parts i thought sumbody might want sumthing off of it before i crush it ! no shiping on larger parts such as complete axles and stuff like that, you name the part i will see if it is there and good or not and a price if it is there and good

junkyardpartseeker · 10-19-2004, 09:23 PM

How about the dash clock and wiring for it, a shift indicator if it is there, and am needing fender emblems from a blazer. And a passenger amber front turn signal lens if not broke. Chrome trim not important.

Tommy

clarkjw24 · 10-19-2004, 09:35 PM

I sent you a pm about the whole truck or the axles and sm465/np205. Got any driveshafts with that. Hows the rust on the frame?

**tnblazerk5** · 10-19-2004, 09:59 PM

Quote:

Originally Posted by junkyardpartseeker

How about the dash clock and wiring for it, a shift indicator if it is there, and am needing fender emblems from a blazer. And a passenger amber front turn signal lens if not broke. Chrome trim not important.

Tommy

i am sure i got those i will look in the morning for them and give ya a price then . what year blazer emblems you want ?

**tnblazerk5** · 10-19-2004, 10:04 PM

Quote:

Originally Posted by clarkjw24

I sent you a pm about the whole truck or the axles and sm465/np205. Got any driveshafts with that. Hows the rust on the frame?

the frame is good ( i think will look in the morning )the truck was a auto truck , the only sm465 and np205 i got has the adapter busted on it and no shifter for the 205 and i dont have the driveshafts for that truck i will also have to look at the axles to see what gear is in there so it will be noon or so tommarow

junkyardpartseeker · 10-20-2004, 12:27 AM

Looking for both 73-80 & 81-87 ones. I had a few ppl write me and asked me to keep my eyes open for them.

Let me know what you got and I can look at my list.

Thanks
Tommy Davis

Quote:

Originally Posted by tnblazerk5

i am sure i got those i will look in the morning for them and give ya a price then . what year blazer emblems you want ?

**tnblazerk5** · 10-20-2004, 12:43 AM

i got these but the tabs are broke off i used 3m 2sided tape to hold them on till i parted the blazer. and i think i got the other kind too sum where i have to look

junkyardpartseeker · 10-20-2004, 12:47 AM

I will write the guy and ask him if it is ok that the studs are broke off.

Let me know condition of the other ones. If you also have the cheyenne rear quarter emblems for the 73-80 blazer, let me know and I will also pass that on.

What kind of dash emblem did it have?

Tommy

**tnblazerk5** · 10-20-2004, 11:02 AM

junkyardpartseeker here is the other blazer fender emblems i got here i havent had time to get to the other lot to look for the clock and wireing ,shift indicator ,pass front amber signal lens , yet but i will later today

*bisquik65* · 10-21-2004, 06:13 PM

I have the shafts out of a 79 long bed.4x4 If you want the whole truck clarkj i could help get it your way some. If thats o.k. with tnblazerk5.

**tnblazerk5** · 10-21-2004, 09:39 PM

Quote:

Originally Posted by bisquik65

I have the shafts out of a 79 long bed.4x4 If you want the whole truck clarkj i could help get it your way some. If thats o.k. with tnblazerk5.

thats fine with me, clarkjw24 its up to you if you want it or not

rolson1039 · 10-21-2004, 10:05 PM

how much for the column minus the steering wheel shipped to 08879 in south amboy NJ?

**tnblazerk5** · 10-21-2004, 10:46 PM

sorry for the late responce i just got to the other lot today

juckyardpartseeker i looked for the cheyenne emblems and i dont have them and the amber lens was busted and there wasnt a dash emblem and no clock but there is a wireing there will have to look at the wiring in the day got dark on me there sorry

rolson039 i got a tilt auto one in a blazer at the other lot will look at it tomarrow and see if its all there then give ya a price

**tnblazerk5** · 10-22-2004, 10:12 PM

Quote:

Originally Posted by rolson1039

how much for the column minus the steering wheel shipped to 08879 in south amboy NJ?

here a pic of it. its lose and need tighted or a kit put in it you still want it ?

**tnblazerk5** · 10-22-2004, 10:27 PM

i got more parts on the 73+blazer board sum parts will work on the trucks too

**tnblazerk5** · 10-24-2004, 01:20 PM

still for sale

**tnblazerk5** · 10-26-2004, 11:49 AM

this is geting the choped this weekend too last chance on parts

trukkers69 · 10-26-2004, 09:37 PM

How much for just the axles ?

**tnblazerk5** · 10-26-2004, 10:13 PM

Quote:

Originally Posted by trukkers69

How much for just the axles ?

by axles you mean? complete front and rear ends ? or just the axles out of them ?

Devil'S Ride · 10-26-2004, 11:38 PM

speedo cable from a 465/205? good shape? working.....an how much to 97520??
thanks a lot!
-Devil

**tnblazerk5** · 10-27-2004, 12:05 PM

Quote:

Originally Posted by Devil'S Ride

speedo cable from a 465/205? good shape? working.....an how much to 97520??
thanks a lot!
-Devil

no speedo cable sorry

Crank · 10-27-2004, 11:14 PM

Pitman arm... How much?
Brandon

trukkers69 · 10-27-2004, 11:35 PM

I'm looking for the complete axle setup, front and rear.

**tnblazerk5** · 10-28-2004, 11:39 AM

Quote:

Originally Posted by trukkers69

I'm looking for the complete axle setup, front and rear.

pm sent

**tnblazerk5** · 10-28-2004, 06:37 PM

Quote:

Originally Posted by Crank

Pitman arm... How much?
Brandon

sorry didnt see this one, i might have another one at the yard i look tommarow

10-19-2004, 08:45 PM	#1
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	78 3/4 ton for parts this is for parts i thought sumbody might want sumthing off of it before i crush it ! no shiping on larger parts such as complete axles and stuff like that, you name the part i will see if it is there and good or not and a price if it is there and good

10-19-2004, 09:23 PM	#2
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	How about the dash clock and wiring for it, a shift indicator if it is there, and am needing fender emblems from a blazer. And a passenger amber front turn signal lens if not broke. Chrome trim not important. Tommy __________________ junkyardpartseeker@sbcglobal.net

10-20-2004, 12:47 AM	#8
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	I will write the guy and ask him if it is ok that the studs are broke off. Let me know condition of the other ones. If you also have the cheyenne rear quarter emblems for the 73-80 blazer, let me know and I will also pass that on. What kind of dash emblem did it have? Tommy __________________ junkyardpartseeker@sbcglobal.net

10-21-2004, 06:13 PM	#10
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I have the longbed driveshafts I have the shafts out of a 79 long bed.4x4 If you want the whole truck clarkj i could help get it your way some. If thats o.k. with tnblazerk5.

10-21-2004, 10:05 PM	#12
rolson1039 Registered User Join Date: Oct 2002 Location: NJ Posts: 404	how much for the column minus the steering wheel shipped to 08879 in south amboy NJ? __________________ so many trucks so little time!!!

10-19-2004, 09:35 PM	#3
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	I sent you a pm about the whole truck or the axles and sm465/np205. Got any driveshafts with that. Hows the rust on the frame?

10-20-2004, 12:43 AM	#7
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	i got these but the tabs are broke off i used 3m 2sided tape to hold them on till i parted the blazer. and i think i got the other kind too sum where i have to look

10-20-2004, 11:02 AM	#9
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	junkyardpartseeker here is the other blazer fender emblems i got here i havent had time to get to the other lot to look for the clock and wireing ,shift indicator ,pass front amber signal lens , yet but i will later today

10-21-2004, 10:46 PM	#13
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	sorry for the late responce i just got to the other lot today juckyardpartseeker i looked for the cheyenne emblems and i dont have them and the amber lens was busted and there wasnt a dash emblem and no clock but there is a wireing there will have to look at the wiring in the day got dark on me there sorry rolson039 i got a tilt auto one in a blazer at the other lot will look at it tomarrow and see if its all there then give ya a price

10-22-2004, 10:27 PM	#15
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	i got more parts on the 73+blazer board sum parts will work on the trucks too

10-24-2004, 01:20 PM	#16
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	still for sale

10-26-2004, 11:49 AM	#17
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	this is geting the choped this weekend too last chance on parts

10-26-2004, 09:37 PM	#18
trukkers69 Registered User Join Date: Jan 2003 Location: Sebastopol Miss. Posts: 169	How much for just the axles ? __________________ EXPERIMENTAL STAGES OF SANITY _____________________________ Run whatcha brung, and hope you brung enuff

10-26-2004, 11:38 PM	#20
Devil'S Ride Registered User Join Date: Nov 2003 Location: Grants PassOregon Posts: 335	speedo cable from a 465/205? good shape? working.....an how much to 97520?? thanks a lot! -Devil __________________ The Devil 1983 ONE TON 454/400/208 11" of lift on 44's

10-27-2004, 11:14 PM	#22
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Pitman arm... How much? Brandon



Register or Log In To remove these advertisements.

10-27-2004, 11:35 PM	#23
trukkers69 Registered User Join Date: Jan 2003 Location: Sebastopol Miss. Posts: 169	I'm looking for the complete axle setup, front and rear. __________________ EXPERIMENTAL STAGES OF SANITY _____________________________ Run whatcha brung, and hope you brung enuff

Register or Log In To remove these advertisements.