The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Rear Main Seal install (https://67-72chevytrucks.com/vboard/showthread.php?t=130864)

RapidRide2 12-08-2004 10:11 PM

Rear Main Seal install
 
Shoooo,,, it has been a month since i have been able to log onto this board???? Why i have no idea,, but was able to log in tonight. My question is as follows,,, Can a rear main seal be replaced on an 83' gmc full size 1/2 ton automatic 305 without jacking up the motor???? Will the pan clear the oil pump pickup and crossmember simultaneously?????? Also,,, has anyone ever had any success with the new one piece oil pan gaskets???? P.S. is the rear main the only thing that would leak without the engine running??? quite a bit of oil is dripping down onto my crossover pipe then the ground. The truck has hardly been driven.

SanitysBane 12-08-2004 11:01 PM

yes the oil pan will clear with out jacking up the engine, it did on my C10

Devil'S Ride 12-08-2004 11:12 PM

The oil pan should clear, if I remeber correctly, and yes, get the fel pro one piece gasket....it is WELL worth the money...I have used them several times now, and I believe Fel Pro has found a winner!

Captkaos 12-09-2004 06:52 PM

I replace my oil pump not 2 months ago. Definitely not a problem.

loblazer 12-10-2004 01:44 PM

Ok guys, can you give a little more info on how to do this? Mine is leaking too. I have heard it can be done with the two piece, how do I get it done if I buy a Fel pro?

Thanks, Doug


All times are GMT -4. The time now is 11:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com