The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   3:07 gears (https://67-72chevytrucks.com/vboard/showthread.php?t=149230)

fine 67 04-02-2005 01:19 PM

3:07 gears
 
i"m doning a full frame off on my 72 blazer . new motor/tranny both 350's with 3:07 gears and L 78 -15 or p 235 will the truck be a gutless slug.are 3:73 the way to go thanks

BobbyK 04-02-2005 01:32 PM

3:73 are an all-round good gear ratio.Good in the city and fine at hwy speeds.

3chevys 04-02-2005 01:45 PM

I have both 350's as well with 4:11, and was told by club members that 3:73 is the way to go.

bpmcgee 04-02-2005 04:20 PM

Well, that's a religious question. Personally I find that my Blazer with 3.07s isn't slow at all. It's not a hotrod, but I built it trying to get good gas mileage, not burn rubber.

Brian

bouncytruck 04-02-2005 11:27 PM

My '72 has 235/85R16 and 3.07's. It is a stock combo so it is definately very driveable. I don't notice any lack of power in my truck, but I would like to swap up to the 3.73s and get a slightly larger tire. My '69 has 4.10's with 35" tires but since that truck has a built 350 and a shift kit, it is hard to judge the difference.

FRENCHBLUE72 04-03-2005 12:45 AM

I really like my 3:73's with the 32x11.50 tire and a crate motor moves it pretty good..

Jimmy72custom 04-03-2005 01:12 AM

I'm running 260 hp 350ci, SM465, 307 gears, 33x12.50x15. I'm turning about 2200 rpm @ 65 mph in fourth gear.


All times are GMT -4. The time now is 04:58 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com