Parting C10 Plus more parts
 

Cab title & VIN are gone.
LWB bedsides have some small dents, but no rust thru; metal floor has some minor rot; no tailgate; excellent driver bed; $200 picked up
Frame rails were hacked; excellent frame parts below;
x-members, small, $20 shipped; big rear one $30 shipped
4 cab mounts, $40 shipped
auto x-member; $40 shipped (SOLD)
4.10 6 lug rear diff. $50 picked up
painted rear step bumper, $20 picked-up
4-core radiator $30 picked up
Strong 350/TH350. Engine has oil dipstick on pass. side. Has tall Edelbrock valve covers. Edelbrock Performer intake. Headers with mufflers. HEI. $500(SOLD)
I also have a SWB frame; '71, 5 lug disc, PS, 3.08 posi, sand-blasted, epoxy black primered. $400.(the posi is worth $300;(SOLD AS A PACKAGE DEAL)I will sell separate).(I'll also sell the frame parts separate; PS setup; $100;(SOLD) Disc setup with master cylinder & prop. valve;$75;(SOLD); trailing arms; $100)(SOLD)
Also a 4x4 PS box & pump..no hoses...$100 shipped
various switches, knobs, wiper motor, etc....just ask

Reply here first on items to avoid suspicion.........Thanks.............Zoomy
I'm located about 25 miles north of Madison, Wi.

Some great prices there Zoomy! I would be grabbing that engine tranny combo in heartbeat but you are further than I can reach in a day! I would have to get that frame too...WOW!

Hey Zoomy,does the 71 swb frame have a title?

You wouldn't consider shipping that 4 core radiator would you? Shipping would be to Fort Worth, Texas 76179.

Hi Zoomy, I'll take that auto crossmember...let me know how you want payment. Thanks, Gord
P.S. post some pictures of that bed, if you can...might be interested for my wood truck.

Where in WI are you?

I'm interested in that 4.10 diff.

Thanks

Paul

I see 72gord is ahead of me but I'd be interested in seeing pictures of the bed.

Also the painted rear step bumper.

Would like to see pic of the SWB frame

location, pix
 

Gord, Are you going to Jefferson ? I can bring the x-member along. This bed is excellent for a wood hauler. I'm located about 25 miles north of Madison, Wi. It'll be a while for pix. My picture literate sister-in-law is in Mexico right now. The title & VIN for the frame went with the junk cab........Z

Yup, I am going to Jefferson, just not sure which day...what day you going? Maybe we can work this out!!! Later, Gord

Zoomy,
The engine is a runner correct? Do you have any #s on it. If no one has claimed it put me inline for the Engine/Trans. Depending on how far you are from me. I'll PM you with my phone # we can chat.
Thanks,
Paul

New to this site - could you explain what comes with the following:
Disc setup with master cylinder & prop. valve;$75

Zoomy, I will talk to the guys I'm coming down with, if they don't have to work...we will come on Saturday. I'll let you know in a couple days. Gord

zoomy, the disc set up, how easily would it fit on my 67? and would that $75 delivery to council bluffs, ia? would that whole front end include ps setup too? what would you want for delivery of that to cb?(if possible) that is if doubled doesn't want it first

Zoomy do you still have the colum?

Let me know about those #s on the engine. I could possibly make a run this weekend yet.
Later,
Paul

Zoomy, we will be coming to Jefferson on Sunday, Saturday won't work for one of the guys coming with. Gord

Booth & Gord
 

Booth, the block is 14010207. The heads are 3986339X. What type column do you need ? Gord, It looks like I'm going to Kansas again next weekend, but will be back in time for the sunday show...............Z

Mr. Zoomy you have a PM.

Wiring Harness
 

Hi,
Do you happen to have a good ignition switch with the bezel, and the plug with a couple of inches of wire on it? I also need a good wiper switch with knob. Let me know if you have them and how much with shipping to Burton Ohio 44021.

Thanks,
Bob

updated
 

Updated & lowered prices.

Just to update you Zoomy, I got back at 3pm on Saturday and by 2am this morning I had the engine in. I still have to get a drive shaft made and I had to rob my V8 frame for a crossmember and the motor mounts, but she's ready to rock and roll. Nice doing business with you. I don't think I'll ever get a hair up my butt to drive all day and put and engine in again, makes for a long day.
Later,
Paul

Can you post some pictures of the bedsides?