Parting C10 Plus more parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ZOOMY · 04-11-2005, 02:55 AM

Cab title & VIN are gone.
LWB bedsides have some small dents, but no rust thru; metal floor has some minor rot; no tailgate; excellent driver bed; $200 picked up
Frame rails were hacked; excellent frame parts below;
x-members, small, $20 shipped; big rear one $30 shipped
4 cab mounts, $40 shipped
auto x-member; $40 shipped (SOLD)
4.10 6 lug rear diff. $50 picked up
painted rear step bumper, $20 picked-up
4-core radiator $30 picked up
Strong 350/TH350. Engine has oil dipstick on pass. side. Has tall Edelbrock valve covers. Edelbrock Performer intake. Headers with mufflers. HEI. $500(SOLD)
I also have a SWB frame; '71, 5 lug disc, PS, 3.08 posi, sand-blasted, epoxy black primered. $400.(the posi is worth $300;(SOLD AS A PACKAGE DEAL)I will sell separate).(I'll also sell the frame parts separate; PS setup; $100;(SOLD) Disc setup with master cylinder & prop. valve;$75;(SOLD); trailing arms; $100)(SOLD)
Also a 4x4 PS box & pump..no hoses...$100 shipped
various switches, knobs, wiper motor, etc....just ask

Reply here first on items to avoid suspicion.........Thanks.............Zoomy
I'm located about 25 miles north of Madison, Wi.

stllookn · 04-11-2005, 03:07 AM

Some great prices there Zoomy! I would be grabbing that engine tranny combo in heartbeat but you are further than I can reach in a day! I would have to get that frame too...WOW!

kingsolver72 · 04-11-2005, 07:38 AM

Hey Zoomy,does the 71 swb frame have a title?

1978steven · 04-11-2005, 07:46 AM

You wouldn't consider shipping that 4 core radiator would you? Shipping would be to Fort Worth, Texas 76179.

72gord · 04-11-2005, 08:07 AM

Hi Zoomy, I'll take that auto crossmember...let me know how you want payment. Thanks, Gord
P.S. post some pictures of that bed, if you can...might be interested for my wood truck.

Paul72 · 04-11-2005, 08:27 AM

Where in WI are you?

I'm interested in that 4.10 diff.

Thanks

Paul

mrein3 · 04-11-2005, 08:37 AM

I see 72gord is ahead of me but I'd be interested in seeing pictures of the bed.

Also the painted rear step bumper.

RicksTrucks · 04-11-2005, 10:16 AM

Would like to see pic of the SWB frame

ZOOMY · 04-11-2005, 11:45 PM

Gord, Are you going to Jefferson ? I can bring the x-member along. This bed is excellent for a wood hauler. I'm located about 25 miles north of Madison, Wi. It'll be a while for pix. My picture literate sister-in-law is in Mexico right now. The title & VIN for the frame went with the junk cab........Z

72gord · 04-12-2005, 08:53 AM

Yup, I am going to Jefferson, just not sure which day...what day you going? Maybe we can work this out!!! Later, Gord

booth · 04-12-2005, 10:35 AM

Zoomy,
The engine is a runner correct? Do you have any #s on it. If no one has claimed it put me inline for the Engine/Trans. Depending on how far you are from me. I'll PM you with my phone # we can chat.
Thanks,
Paul

DoubleD · 04-12-2005, 11:50 PM

New to this site - could you explain what comes with the following:
Disc setup with master cylinder & prop. valve;$75

72gord · 04-13-2005, 08:39 AM

Zoomy, I will talk to the guys I'm coming down with, if they don't have to work...we will come on Saturday. I'll let you know in a couple days. Gord

custom67gmc · 04-15-2005, 12:12 AM

zoomy, the disc set up, how easily would it fit on my 67? and would that $75 delivery to council bluffs, ia? would that whole front end include ps setup too? what would you want for delivery of that to cb?(if possible) that is if doubled doesn't want it first

booth · 04-15-2005, 01:08 AM

Zoomy do you still have the colum?

Let me know about those #s on the engine. I could possibly make a run this weekend yet.
Later,
Paul

72gord · 04-15-2005, 08:13 AM

Zoomy, we will be coming to Jefferson on Sunday, Saturday won't work for one of the guys coming with. Gord

ZOOMY · 04-15-2005, 08:54 PM

Booth, the block is 14010207. The heads are 3986339X. What type column do you need ? Gord, It looks like I'm going to Kansas again next weekend, but will be back in time for the sunday show...............Z

booth · 04-15-2005, 10:50 PM

Mr. Zoomy you have a PM.

cc_bob · 04-15-2005, 11:15 PM

Hi,
Do you happen to have a good ignition switch with the bezel, and the plug with a couple of inches of wire on it? I also need a good wiper switch with knob. Let me know if you have them and how much with shipping to Burton Ohio 44021.

Thanks,
Bob

ZOOMY · 04-16-2005, 12:29 PM

Updated & lowered prices.

booth · 04-17-2005, 09:10 PM

Just to update you Zoomy, I got back at 3pm on Saturday and by 2am this morning I had the engine in. I still have to get a drive shaft made and I had to rob my V8 frame for a crossmember and the motor mounts, but she's ready to rock and roll. Nice doing business with you. I don't think I'll ever get a hair up my butt to drive all day and put and engine in again, makes for a long day.
Later,
Paul

mrein3 · 04-18-2005, 09:51 AM

Quote:

Originally Posted by ZOOMY

Updated & lowered prices.

Can you post some pictures of the bedsides?

04-11-2005, 02:55 AM	#1
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Parting C10 Plus more parts Cab title & VIN are gone. LWB bedsides have some small dents, but no rust thru; metal floor has some minor rot; no tailgate; excellent driver bed; $200 picked up Frame rails were hacked; excellent frame parts below; x-members, small, $20 shipped; big rear one $30 shipped 4 cab mounts, $40 shipped auto x-member; $40 shipped (SOLD) 4.10 6 lug rear diff. $50 picked up painted rear step bumper, $20 picked-up 4-core radiator $30 picked up Strong 350/TH350. Engine has oil dipstick on pass. side. Has tall Edelbrock valve covers. Edelbrock Performer intake. Headers with mufflers. HEI. $500(SOLD) I also have a SWB frame; '71, 5 lug disc, PS, 3.08 posi, sand-blasted, epoxy black primered. $400.(the posi is worth $300;(SOLD AS A PACKAGE DEAL)I will sell separate).(I'll also sell the frame parts separate; PS setup; $100;(SOLD) Disc setup with master cylinder & prop. valve;$75;(SOLD); trailing arms; $100)(SOLD) Also a 4x4 PS box & pump..no hoses...$100 shipped various switches, knobs, wiper motor, etc....just ask Reply here first on items to avoid suspicion.........Thanks.............Zoomy I'm located about 25 miles north of Madison, Wi. Last edited by ZOOMY; 04-16-2005 at 07:59 PM.

04-11-2005, 03:07 AM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Some great prices there Zoomy! I would be grabbing that engine tranny combo in heartbeat but you are further than I can reach in a day! I would have to get that frame too...WOW! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 04-11-2005 at 03:08 AM.

04-11-2005, 07:46 AM	#4
1978steven Registered User Join Date: Oct 2004 Location: Currently New Windsor, NY but Texas is home Posts: 332	You wouldn't consider shipping that 4 core radiator would you? Shipping would be to Fort Worth, Texas 76179. __________________ 2002 Silverado 2500HD LB7 CCSB LT EFI Live by Rob at ATP, Edge CTS Insight DSP 5 control, S&B CAI, PPE boost valve, Pro Fab AIH, AirDog II 165, PPE WIF sensor delete plug, 5" stainless exhaust, Cognito braces & HD tie rods, H2's 315/70 R17 BFG's 2004 Tahoe LT 2006 Silverado Z71 LS 1971 Chevy C10 Last edited by 1978steven; 04-11-2005 at 07:49 AM.

04-11-2005, 08:07 AM	#5
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	Hi Zoomy, I'll take that auto crossmember...let me know how you want payment. Thanks, Gord P.S. post some pictures of that bed, if you can...might be interested for my wood truck. Last edited by 72gord; 04-11-2005 at 08:08 AM.

04-11-2005, 08:27 AM	#6
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Where in WI are you? I'm interested in that 4.10 diff. Thanks Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958 Last edited by Paul72; 04-11-2005 at 08:31 AM.

04-11-2005, 07:38 AM	#3
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,245	Hey Zoomy,does the 71 swb frame have a title?

04-11-2005, 08:37 AM	#7
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,254	I see 72gord is ahead of me but I'd be interested in seeing pictures of the bed. Also the painted rear step bumper. __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

04-11-2005, 10:16 AM	#8
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Would like to see pic of the SWB frame __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

04-11-2005, 11:45 PM	#9
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	location, pix Gord, Are you going to Jefferson ? I can bring the x-member along. This bed is excellent for a wood hauler. I'm located about 25 miles north of Madison, Wi. It'll be a while for pix. My picture literate sister-in-law is in Mexico right now. The title & VIN for the frame went with the junk cab........Z Last edited by ZOOMY; 04-11-2005 at 11:47 PM.

04-12-2005, 08:53 AM	#10
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	Yup, I am going to Jefferson, just not sure which day...what day you going? Maybe we can work this out!!! Later, Gord

04-12-2005, 10:35 AM	#11
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Zoomy, The engine is a runner correct? Do you have any #s on it. If no one has claimed it put me inline for the Engine/Trans. Depending on how far you are from me. I'll PM you with my phone # we can chat. Thanks, Paul __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)

04-12-2005, 11:50 PM	#12
DoubleD Registered User Join Date: Apr 2005 Location: Council Bluffs, IA Posts: 2	New to this site - could you explain what comes with the following: Disc setup with master cylinder & prop. valve;$75

04-13-2005, 08:39 AM	#13
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	Zoomy, I will talk to the guys I'm coming down with, if they don't have to work...we will come on Saturday. I'll let you know in a couple days. Gord

04-15-2005, 12:12 AM	#14
custom67gmc Registered User Join Date: Apr 2005 Location: iowa Posts: 49	zoomy, the disc set up, how easily would it fit on my 67? and would that $75 delivery to council bluffs, ia? would that whole front end include ps setup too? what would you want for delivery of that to cb?(if possible) that is if doubled doesn't want it first Last edited by custom67gmc; 04-15-2005 at 12:16 AM.

04-15-2005, 01:08 AM	#15
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Zoomy do you still have the colum? Let me know about those #s on the engine. I could possibly make a run this weekend yet. Later, Paul __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)



Register or Log In To remove these advertisements.

04-15-2005, 08:13 AM	#16
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	Zoomy, we will be coming to Jefferson on Sunday, Saturday won't work for one of the guys coming with. Gord

04-15-2005, 08:54 PM	#17
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Booth & Gord Booth, the block is 14010207. The heads are 3986339X. What type column do you need ? Gord, It looks like I'm going to Kansas again next weekend, but will be back in time for the sunday show...............Z

04-15-2005, 10:50 PM	#18
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Mr. Zoomy you have a PM. __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)

04-15-2005, 11:15 PM	#19
cc_bob Registered User Join Date: Jan 2004 Location: Burton, Ohio Posts: 95	Wiring Harness Hi, Do you happen to have a good ignition switch with the bezel, and the plug with a couple of inches of wire on it? I also need a good wiper switch with knob. Let me know if you have them and how much with shipping to Burton Ohio 44021. Thanks, Bob __________________ 67 C10 396 stepside project 72 C20 402 72 K10 SWB (plow truck) 86 K20

04-16-2005, 12:29 PM	#20
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	updated Updated & lowered prices.

04-17-2005, 09:10 PM	#21
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Just to update you Zoomy, I got back at 3pm on Saturday and by 2am this morning I had the engine in. I still have to get a drive shaft made and I had to rob my V8 frame for a crossmember and the motor mounts, but she's ready to rock and roll. Nice doing business with you. I don't think I'll ever get a hair up my butt to drive all day and put and engine in again, makes for a long day. Later, Paul __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)

Register or Log In To remove these advertisements.