The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Drive shaft length? (https://67-72chevytrucks.com/vboard/showthread.php?t=171174)

fade94 09-01-2005 03:13 PM

Drive shaft length?
 
I am putting my 71 to a short frame. What is the drive shaft length for a short tail auto trans? I currently have a TH350, but also have a TH400 that I want to put in. Will the same shaft work for both trans (I know the yoke is different).?

69 longhorn 09-01-2005 05:03 PM

try www.tciauto.com for trans lenghts. i think you will find the short 350t(6" tail), is 11/16" shorter than a short tail 400T,& thats enough that the same lenght shaft wont work with a 1 pcs shaft. on a 2 pc shaft , with a slipyolk in the middle, i have spilt the difference tween the trans & center slip......& swapped a 3spd stick for a 400T, & also the other way without problems. crazyL

Longhorn Man 09-01-2005 09:48 PM

4 foot 10 inches on a SWB with a one piece shaft a TH350 with a small block mounted in the correct location.


All times are GMT -4. The time now is 02:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com