![]() |
About to go get my Bed Liner done need bed options
The school put this crappy metal bed on my stepside that has "waves" in it. I can't decide it I want to put down some 3/4 inch plywood down and have that rhino lined over or purchase some steel and weld it down.
:fb: |
How wavy is it? I know that they can spray liners down thick and most of them flow to the low spots. I would take and ask were you going to get it sprayed in at what they might can do with it...I wouldn't put plywood..
eric |
Dont like plywood,,,but i have line x in my truck bed and this stuff is great so far....
Smitty |
i just seen one sprayed over wood today and it was starting to peel a bit. i would do it over metal.
|
Bryan,
We used a piece of diamond plate steel for a floor on my 66 Stepside. Don't get to wild with that welder. That single wall bed is going to heat up quick and burn that paint on the outside. I saw a post a while back where someone used T-rex from Lowes for their floor. They said it held up very well and it has like a 100yr warranty. I know something like that would require you to put your metal strips back in the floor. You could still spray the inside of your bed and leave the floor wood/t-rex. |
I'm going to go talk to a guy today that bought my Trazer. He works at a big steel fabricator in town and he told me he could get the steel at their cost. I'll try that route first.
|
Just another option. http://www.gaylordslids.com/cruiser.php http://www.accessconnect.com/custombed.htm
|
All times are GMT -4. The time now is 12:06 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com