About to go get my Bed Liner done need bed options - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 09-04-2005, 07:26 PM

The school put this crappy metal bed on my stepside that has "waves" in it. I can't decide it I want to put down some 3/4 inch plywood down and have that rhino lined over or purchase some steel and weld it down.

Chevy_Man · 09-04-2005, 07:43 PM

How wavy is it? I know that they can spray liners down thick and most of them flow to the low spots. I would take and ask were you going to get it sprayed in at what they might can do with it...I wouldn't put plywood..

eric

71meangreenc10 · 09-04-2005, 07:57 PM

Dont like plywood,,,but i have line x in my truck bed and this stuff is great so far....

Smitty

CHEVYE · 09-04-2005, 11:56 PM

i just seen one sprayed over wood today and it was starting to peel a bit. i would do it over metal.

see ten · 09-05-2005, 07:47 AM

Bryan,
We used a piece of diamond plate steel for a floor on my 66 Stepside. Don't get to wild with that welder. That single wall bed is going to heat up quick and burn that paint on the outside. I saw a post a while back where someone used T-rex from Lowes for their floor. They said it held up very well and it has like a 100yr warranty. I know something like that would require you to put your metal strips back in the floor. You could still spray the inside of your bed and leave the floor wood/t-rex.

5150 · 09-09-2005, 09:26 AM

I'm going to go talk to a guy today that bought my Trazer. He works at a big steel fabricator in town and he told me he could get the steel at their cost. I'll try that route first.

1969 C/K CST · 09-09-2005, 09:55 AM

Just another option. http://www.gaylordslids.com/cruiser.php http://www.accessconnect.com/custombed.htm

09-04-2005, 07:26 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	About to go get my Bed Liner done need bed options The school put this crappy metal bed on my stepside that has "waves" in it. I can't decide it I want to put down some 3/4 inch plywood down and have that rhino lined over or purchase some steel and weld it down. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-04-2005, 07:57 PM	#3
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Dont like plywood,,,but i have line x in my truck bed and this stuff is great so far.... Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

09-04-2005, 11:56 PM	#4
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	i just seen one sprayed over wood today and it was starting to peel a bit. i would do it over metal. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

09-09-2005, 09:26 AM	#6
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	I'm going to go talk to a guy today that bought my Trazer. He works at a big steel fabricator in town and he told me he could get the steel at their cost. I'll try that route first. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-09-2005, 09:55 AM	#7
1969 C/K CST A.K.A- Crummy Join Date: Jun 2005 Location: NC foothills Posts: 3,025	Just another option. http://www.gaylordslids.com/cruiser.php http://www.accessconnect.com/custombed.htm __________________ 2003 Silverado Z71 Are fishermen all liars?

09-04-2005, 07:43 PM	#2
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	How wavy is it? I know that they can spray liners down thick and most of them flow to the low spots. I would take and ask were you going to get it sprayed in at what they might can do with it...I wouldn't put plywood.. eric

09-05-2005, 07:47 AM	#5
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Bryan, We used a piece of diamond plate steel for a floor on my 66 Stepside. Don't get to wild with that welder. That single wall bed is going to heat up quick and burn that paint on the outside. I saw a post a while back where someone used T-rex from Lowes for their floor. They said it held up very well and it has like a 100yr warranty. I know something like that would require you to put your metal strips back in the floor. You could still spray the inside of your bed and leave the floor wood/t-rex.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.