WTB: 5 Speed Trans
 

I need a decent, low mile 5 speed Getrag trans for a 1991 Chev 1/2 ton w/4.3 liter. Just went over 325K miles on original and it's on it's last legs. Would prefer something close to southern OK or north TX to personally come and pickup. Please contact me at carneyjw@centcom.mil Thanks. Jim

That makes two of us.

Looking for an 88-91, Getrag/NV3500 tranny.

4wd version.

Not sure if I need the 27- or the 32- spline version.

Will be mating to an 83 305 and 89 NP241.

Bellhousing, master & slave cylinders would be helpful too.

I am in Central VA (Richmond area) so pick - up within a reasonable distance is preferred!

Thanks!

-cmc-

Re: WTB: 5 Speed Trans
 

I have a 5 speed in my 92 that I am going to sell. Truck is 2wd c1500. How do I know which model it is??

Re: WTB: 5 Speed Trans
 

Phantom, C1500 will have an NV3500

The C2500 and 3500 trucks have the NV4500

Re: WTB: 5 Speed Trans
 

Thanks!! Do you know if these truck use a clutch fork with a slave or a hyrdo throw out bearing??

Re: WTB: 5 Speed Trans
 

I am not 100% sure, but I do believe they went to the internal slave in 97 or something like that. Just for a general rule of thumb, we'll say that anything from 95 down uses a clutch fork with a hydraulic slave cylinder to actuate it.

Re: WTB: 5 Speed Trans
 

Found out it is a FORK type bearing