The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988-1998 GMT400 Chevy & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=11)
-   -   Maybe Parting 95 Ext P/U South Carolina (https://67-72chevytrucks.com/vboard/showthread.php?t=179091)

67mbsc 11-05-2005 01:54 AM

Maybe Parting 95 Ext P/U South Carolina
 
Hey Yall,
I have a 95 extended cab that I may be parting, depending on the response to this, and whether or not I can use the engine in my other car. I'll have the bed, front clip, and cab for sale.
Bed, clean, with tailgate, lights, ready to put on $500
Front clip, complete with everything, except radiator $350
Ext. Cab, no front seat, no radio, glass good, no cracks, or chips, A/C, grey cloth $300
Doors with Power windows, clean. No door panels. $125 each

Shipping only on doors.
Guys, I can NOT figure out how to post pictures, I know I'll see a post, saying post no good without pics, but I can't post them!
If you need pics, just ask, I'll see what I can do.
Parts located in Myrtle Beach, South Carolina.

PT'S 70 CST 11-05-2005 10:54 AM

Re: Maybe Parting 95 Ext P/U South Carolina
 
Is the bed a short bed or long, I am interested in the bed. Could you send me some pics of the bed and is it dent free. DWAGSFAN227@CS.COM

Thanks PT

97silv5.7 11-05-2005 11:12 AM

Re: Maybe Parting 95 Ext P/U South Carolina
 
chevy or gmc on the front clip?

67mbsc 11-05-2005 04:57 PM

Re: Maybe Parting 95 Ext P/U South Carolina
 
Guys,'
This is a Chevrolet. Short bed. The bed is dent and rust,,,,,,,,,,what's that,,,,,, rust,,hehehehe............rust free, too. I'll see if I can get some pics for ya on Sunday, 70CST. K?

99-2door 11-05-2005 06:19 PM

Re: Maybe Parting 95 Ext P/U South Carolina
 
Do you happen to have the driver's door switch surround panel. Must have provision for power mirror switch.

Thanks

phantom dually 11-06-2005 01:31 AM

Re: Maybe Parting 95 Ext P/U South Carolina
 
Send pics to Jegray@insightbb.com

67mbsc 11-06-2005 09:16 AM

Re: Maybe Parting 95 Ext P/U South Carolina
 
99-2dr, I do have that switch, but it will go with the cab, IF I part this truck. If I can get some commitments to buy the bed/clip/and/or cab, I will part the truck that way. Sorry

67mbsc 11-06-2005 09:19 AM

Re: Maybe Parting 95 Ext P/U South Carolina
 
If this truck gets parted, I would have a 5 speed Getrag trans to sell, too. I'd need $500 for it.

67ChevyRedneck 11-07-2005 11:28 AM

Re: Maybe Parting 95 Ext P/U South Carolina
 
What's a 5 speed getrag trans? Manual?

67mbsc 11-07-2005 09:50 PM

Re: Maybe Parting 95 Ext P/U South Carolina
 
Hey Redneck!
Yep, straight shift, 5 speed manual

hammered94 11-16-2005 11:16 PM

Re: Maybe Parting 95 Ext P/U South Carolina
 
If you decide to part the cab out, I need the inner door panels and the wiring harness for the window and lock switches!

Bagged87C10 11-20-2005 04:01 PM

Re: Maybe Parting 95 Ext P/U South Carolina
 
what motor you have in it? u wanna sell the motor?

86swb 11-20-2005 06:53 PM

Re: Maybe Parting 95 Ext P/U South Carolina
 
Do you have the steering wheel still? Just the wheel.

toddtheodd 12-06-2005 08:06 AM

Re: Maybe Parting 95 Ext P/U South Carolina
 
If you decide to part the cab out, I need the little latch thingy for one of the back side windows.
Also... I need the jack accessories... Mainly that tube thing that is supposed to go through the bumper to lower the spare tire down... (or can I just use a regular lug wrench?)
Todd

alf4444 12-08-2005 10:18 PM

Re: Maybe Parting 95 Ext P/U South Carolina
 
I'd take the entire dash how much shipped to 84118

67mbsc 12-09-2005 07:31 AM

Re: Maybe Parting 95 Ext P/U South Carolina
 
Hey Yall,
I've been sick, sorry for not getting pictures of truck to everybody that asked. Anybody that is interested in the bed, or front clip, please e-mail me at mv1204@sccoast.net
I have to sell the clip and/or bed before I will let the other parts go. No engine, but I do have a Getrag 5 speed to go.It's a good trans, I bought it for this truck.
Thanks

RodKnockin 12-11-2005 08:42 PM

Re: Maybe Parting 95 Ext P/U South Carolina
 
How much for the cab itself?

Russell 12-11-2005 09:34 PM

Re: Maybe Parting 95 Ext P/U South Carolina
 
Have you got a clutch master cylinder? If so, email pics with some measurements of the length of the pushrod, and the distance between the mounting holes to me at Russell@ZieglerDigital.ca


All times are GMT -4. The time now is 03:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com