Maybe Parting 95 Ext P/U South Carolina - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67mbsc · 11-05-2005, 01:54 AM

Hey Yall,
I have a 95 extended cab that I may be parting, depending on the response to this, and whether or not I can use the engine in my other car. I'll have the bed, front clip, and cab for sale.
Bed, clean, with tailgate, lights, ready to put on $500
Front clip, complete with everything, except radiator $350
Ext. Cab, no front seat, no radio, glass good, no cracks, or chips, A/C, grey cloth $300
Doors with Power windows, clean. No door panels. $125 each

Shipping only on doors.
Guys, I can NOT figure out how to post pictures, I know I'll see a post, saying post no good without pics, but I can't post them!
If you need pics, just ask, I'll see what I can do.
Parts located in Myrtle Beach, South Carolina.

PT'S 70 CST · 11-05-2005, 10:54 AM

Is the bed a short bed or long, I am interested in the bed. Could you send me some pics of the bed and is it dent free. DWAGSFAN227@CS.COM

Thanks PT

97silv5.7 · 11-05-2005, 11:12 AM

chevy or gmc on the front clip?

67mbsc · 11-05-2005, 04:57 PM

Guys,'
This is a Chevrolet. Short bed. The bed is dent and rust,,,,,,,,,,what's that,,,,,, rust,,hehehehe............rust free, too. I'll see if I can get some pics for ya on Sunday, 70CST. K?

99-2door · 11-05-2005, 06:19 PM

Do you happen to have the driver's door switch surround panel. Must have provision for power mirror switch.

Thanks

phantom dually · 11-06-2005, 01:31 AM

Send pics to Jegray@insightbb.com

67mbsc · 11-06-2005, 09:16 AM

99-2dr, I do have that switch, but it will go with the cab, IF I part this truck. If I can get some commitments to buy the bed/clip/and/or cab, I will part the truck that way. Sorry

67mbsc · 11-06-2005, 09:19 AM

If this truck gets parted, I would have a 5 speed Getrag trans to sell, too. I'd need $500 for it.

67ChevyRedneck · 11-07-2005, 11:28 AM

What's a 5 speed getrag trans? Manual?

67mbsc · 11-07-2005, 09:50 PM

Hey Redneck!
Yep, straight shift, 5 speed manual

hammered94 · 11-16-2005, 11:16 PM

If you decide to part the cab out, I need the inner door panels and the wiring harness for the window and lock switches!

Bagged87C10 · 11-20-2005, 04:01 PM

what motor you have in it? u wanna sell the motor?

86swb · 11-20-2005, 06:53 PM

Do you have the steering wheel still? Just the wheel.

toddtheodd · 12-06-2005, 08:06 AM

If you decide to part the cab out, I need the little latch thingy for one of the back side windows.
Also... I need the jack accessories... Mainly that tube thing that is supposed to go through the bumper to lower the spare tire down... (or can I just use a regular lug wrench?)
Todd

alf4444 · 12-08-2005, 10:18 PM

I'd take the entire dash how much shipped to 84118

67mbsc · 12-09-2005, 07:31 AM

Hey Yall,
I've been sick, sorry for not getting pictures of truck to everybody that asked. Anybody that is interested in the bed, or front clip, please e-mail me at mv1204@sccoast.net
I have to sell the clip and/or bed before I will let the other parts go. No engine, but I do have a Getrag 5 speed to go.It's a good trans, I bought it for this truck.
Thanks

RodKnockin · 12-11-2005, 08:42 PM

How much for the cab itself?

Russell · 12-11-2005, 09:34 PM

Have you got a clutch master cylinder? If so, email pics with some measurements of the length of the pushrod, and the distance between the mounting holes to me at Russell@ZieglerDigital.ca

11-05-2005, 01:54 AM	#1
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Maybe Parting 95 Ext P/U South Carolina Hey Yall, I have a 95 extended cab that I may be parting, depending on the response to this, and whether or not I can use the engine in my other car. I'll have the bed, front clip, and cab for sale. Bed, clean, with tailgate, lights, ready to put on $500 Front clip, complete with everything, except radiator $350 Ext. Cab, no front seat, no radio, glass good, no cracks, or chips, A/C, grey cloth $300 Doors with Power windows, clean. No door panels. $125 each Shipping only on doors. Guys, I can NOT figure out how to post pictures, I know I'll see a post, saying post no good without pics, but I can't post them! If you need pics, just ask, I'll see what I can do. Parts located in Myrtle Beach, South Carolina.

11-05-2005, 10:54 AM	#2
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Maybe Parting 95 Ext P/U South Carolina Is the bed a short bed or long, I am interested in the bed. Could you send me some pics of the bed and is it dent free. DWAGSFAN227@CS.COM Thanks PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops Last edited by PT'S 70 CST; 11-05-2005 at 10:55 AM.

11-05-2005, 11:12 AM	#3
97silv5.7 MooMoo Join Date: Feb 2004 Location: Shapleigh, Maine Posts: 2,424	Re: Maybe Parting 95 Ext P/U South Carolina chevy or gmc on the front clip? __________________ '97 ext 4x4 3" body lift and 7'6" Fisher MM2 '04 Polaris 700 twin EFI sold 2-1-07 '07 Polaris 800 twin EFI Stealth Limited Edition Support the Board! Or deal with me foo! Its all fun and games till you find out shes 16.

11-05-2005, 04:57 PM	#4
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Re: Maybe Parting 95 Ext P/U South Carolina Guys,' This is a Chevrolet. Short bed. The bed is dent and rust,,,,,,,,,,what's that,,,,,, rust,,hehehehe............rust free, too. I'll see if I can get some pics for ya on Sunday, 70CST. K?

11-05-2005, 06:19 PM	#5
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Re: Maybe Parting 95 Ext P/U South Carolina Do you happen to have the driver's door switch surround panel. Must have provision for power mirror switch. Thanks __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

11-06-2005, 01:31 AM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: Maybe Parting 95 Ext P/U South Carolina Send pics to Jegray@insightbb.com __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-06-2005, 09:16 AM	#7
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Re: Maybe Parting 95 Ext P/U South Carolina 99-2dr, I do have that switch, but it will go with the cab, IF I part this truck. If I can get some commitments to buy the bed/clip/and/or cab, I will part the truck that way. Sorry

11-06-2005, 09:19 AM	#8
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Re: Maybe Parting 95 Ext P/U South Carolina If this truck gets parted, I would have a 5 speed Getrag trans to sell, too. I'd need $500 for it.

11-07-2005, 11:28 AM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Maybe Parting 95 Ext P/U South Carolina What's a 5 speed getrag trans? Manual? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-07-2005, 09:50 PM	#10
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Re: Maybe Parting 95 Ext P/U South Carolina Hey Redneck! Yep, straight shift, 5 speed manual

11-16-2005, 11:16 PM	#11
hammered94 Registered User Join Date: Jul 2003 Location: OK Posts: 92	Re: Maybe Parting 95 Ext P/U South Carolina If you decide to part the cab out, I need the inner door panels and the wiring harness for the window and lock switches!

11-20-2005, 04:01 PM	#12
Bagged87C10 Registered User Join Date: Nov 2005 Location: Longview Texas Posts: 10	Re: Maybe Parting 95 Ext P/U South Carolina what motor you have in it? u wanna sell the motor?

11-20-2005, 06:53 PM	#13
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: Maybe Parting 95 Ext P/U South Carolina Do you have the steering wheel still? Just the wheel. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

12-06-2005, 08:06 AM	#14
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Re: Maybe Parting 95 Ext P/U South Carolina If you decide to part the cab out, I need the little latch thingy for one of the back side windows. Also... I need the jack accessories... Mainly that tube thing that is supposed to go through the bumper to lower the spare tire down... (or can I just use a regular lug wrench?) Todd __________________ "The greatest pleasure is to vanquish your enemies and chase them before you, to rob them of their wealth and see those dear to them bathed in tears, to ride their horses and clasp to your bosom their wives and daughters." Ghengis Khan IIOY???

12-08-2005, 10:18 PM	#15
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Re: Maybe Parting 95 Ext P/U South Carolina I'd take the entire dash how much shipped to 84118 __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com



Register or Log In To remove these advertisements.

12-09-2005, 07:31 AM	#16
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Re: Maybe Parting 95 Ext P/U South Carolina Hey Yall, I've been sick, sorry for not getting pictures of truck to everybody that asked. Anybody that is interested in the bed, or front clip, please e-mail me at mv1204@sccoast.net I have to sell the clip and/or bed before I will let the other parts go. No engine, but I do have a Getrag 5 speed to go.It's a good trans, I bought it for this truck. Thanks

12-11-2005, 08:42 PM	#17
RodKnockin Registered User Join Date: Dec 2003 Location: East Tennessee Posts: 14	Re: Maybe Parting 95 Ext P/U South Carolina How much for the cab itself?

12-11-2005, 09:34 PM	#18
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: Maybe Parting 95 Ext P/U South Carolina Have you got a clutch master cylinder? If so, email pics with some measurements of the length of the pushrod, and the distance between the mounting holes to me at Russell@ZieglerDigital.ca __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

Register or Log In To remove these advertisements.