The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Aftermarket Sheet Metal (https://67-72chevytrucks.com/vboard/showthread.php?t=182150)

Bob B.

12-06-2005 04:57 AM

Aftermarket Sheet Metal

Who has the best aftermarket sheetmetal?

Palf70Step

12-06-2005 06:42 AM

Re: Aftermarket Sheet Metal

Most of the sheet metal comes from the same place. I'd find a board vendor near you to save shipping. Brothers or WES are both good folks are you side of the country.

mike nutt

12-06-2005 06:49 AM

Re: Aftermarket Sheet Metal

i haven't found any good sheetmetal, i helped a freind restore '68 camero ,he sold all the new sheetmetal because it don't fit,more work to make it fit than to repiar original stuff , so on my 69 c\10 shortbed i'm using all original parts and repairing with patch pieces, much better fit.

junkyarddog1956

12-06-2005 09:45 AM

Re: Aftermarket Sheet Metal

I agree with Mike ... Joe

Old Yeller 1970

12-06-2005 09:59 AM

Re: Aftermarket Sheet Metal

On my resto I used Goodmark Industries hood, right inner and outer fender and battery tray. The hood and outer fender fit OK, they aren't a perfect fit but the originals weren't a perfect fit either, so I would say they are good to use. The battery tray bolted right in but the inner fender required redrilling the bolt holes and reshaping with a hammer and still doesn't fit exactly right.

All times are GMT -4. The time now is 11:15 AM.