Still looking for good cab in Missouri
 

I know, nothing close to me but thought I'd post again. Anyway need a good 69-72 cab, high hump, low hump, a/c or not doesn't matter. Thanks

Re: Still looking for good cab in Missouri
 

How good of cab are you looking for? This board is a good source,... but you probably won't find it in Missouri. Expect to replace rockers and cab corners at the very minimum.

Re: Still looking for good cab in Missouri
 

Well, of course I am looking for a perfect cab! But I am well aware of what is available. Don't mind paying for a good one, if I can find it.

Re: Still looking for good cab in Missouri
 

sorry,... I had to go to Colorado to get mine AZ cab. Hope I didn't offend you.

Re: Still looking for good cab in Missouri
 

No problem! I'll find what I'm looking for eventually. Thanks

Re: Still looking for good cab in Missouri
 

Still here :)

Re: Still looking for good cab in Missouri
 

I might sale mine

Re: Still looking for good cab in Missouri
 

PM sent

Re: Still looking for good cab in Missouri
 

I will be picking up a 67 small window soon.

Re: Still looking for good cab in Missouri
 

The truck is a 72 I really need a 69-72 cab. Thanks anyway

Re: Still looking for good cab in Missouri
 

Sine we are "neighbors"...keep in mind I travel around quite a bit and can help bring you one if you find something you like that is out of state. :)

Just thought I would extend the offer...I know finding a "good" cab in this state is going to be tough.....

Re: Still looking for good cab in Missouri
 

I have 2 nice non air cabs $400 each, in AZ both low hump.

Re: Still looking for good cab in Missouri
 

I have a better than average minnesota cab that will need some work. $400 for whats left of the truck with cab. In northern MN. 72 also.

Re: Still looking for good cab in Missouri
 

Drive on down to Jackson, MS. I have a '69 cab and a complete '71 truck. Both are non-air. Plus we have a junk yard with several...that's SEVERAL complete trucks in there.
You can take either one of mine for $300 (no doors included)
'69 has pin holes in the rockers and corners, but needs driver's kick panel starting several inches below the vent.
'71 I haven't really looked over but there is a hole in the floor on the driver's side.
Below are two pics I have of the cab....I can take better ones, but just to give you a rough idea.....that is the '69 cab in the background.

Re: Still looking for good cab in Missouri
 

i have a 71 cab low hump i'll take $100.00. does need some work

Re: Still looking for good cab in Missouri
 

How much work does it need?

Re: Still looking for good cab in Missouri
 

That sounded a lot like....
"Yo mama is so fat....."
{crowd} - "HOW FAT IS SHE?????"

Re: Still looking for good cab in Missouri
 

Yea I know, Yours looks decent, just too far for me!

Re: Still looking for good cab in Missouri
 

you might talk to ron manes www.manestruckparts.com He usually has some good used parts. tell him "tow hook justin" sent ya (inside joke between me and ron) :)

Re: Still looking for good cab in Missouri
 

I,m looking for a good cab as well only in east Texas not missouri. hopefully one with a title but one without will be ok if condition is nice. floor and rocker and cab corner rust would be expected and easy to fix. hopefully i'll find one without rust under the cowl or around the front windshield must be a big window.. any help here would be nice. thanks

Re: Still looking for good cab in Missouri
 

I still have one here in Kansas.

Re: Still looking for good cab in Missouri
 

I have one down the road south from you . If you want to look at it . Will get you my phone number.

Re: Still looking for good cab in Missouri
 

Send it to me!

Re: Still looking for good cab in Missouri
 

pm sent.Larry

Re: Still looking for good cab in Missouri
 

I have a '71 A/C Low hump cab currently located in Elizabethtown KY that could easily be gotten as close to you as Evansville, IN (or as far east as Lexington, KY BTW). That would be about 4 hours from you. Some of the work has already been done to the cab. It already has new floor boards and outer rockers, and I could be convinced to throw in new outer floorboards (still in box) and new cab corners all for the bargain basement price of $275. With the parts that are already installed and the parts included in the deal, the only other thing required would be a little bit of work around the windshield frame.