Still looking for good cab in Missouri - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RShaips · 12-18-2005, 10:20 AM

I know, nothing close to me but thought I'd post again. Anyway need a good 69-72 cab, high hump, low hump, a/c or not doesn't matter. Thanks

**lolife99** · 12-18-2005, 03:46 PM

How good of cab are you looking for? This board is a good source,... but you probably won't find it in Missouri. Expect to replace rockers and cab corners at the very minimum.

RShaips · 12-18-2005, 07:45 PM

Well, of course I am looking for a perfect cab! But I am well aware of what is available. Don't mind paying for a good one, if I can find it.

**lolife99** · 12-18-2005, 09:11 PM

sorry,... I had to go to Colorado to get mine AZ cab. Hope I didn't offend you.

RShaips · 12-19-2005, 12:14 AM

No problem! I'll find what I'm looking for eventually. Thanks

RShaips · 12-26-2005, 09:57 PM

Still here

**JDL** · 12-28-2005, 10:15 PM

I might sale mine

RShaips · 12-28-2005, 11:12 PM

PM sent

RicksTrucks · 12-29-2005, 07:30 PM

I will be picking up a 67 small window soon.

RShaips · 12-29-2005, 07:53 PM

The truck is a 72 I really need a 69-72 cab. Thanks anyway

crews · 12-29-2005, 08:04 PM

Sine we are "neighbors"...keep in mind I travel around quite a bit and can help bring you one if you find something you like that is out of state.

Just thought I would extend the offer...I know finding a "good" cab in this state is going to be tough.....

**t korinek** · 12-30-2005, 12:52 AM

I have 2 nice non air cabs $400 each, in AZ both low hump.

**too much stuff** · 12-30-2005, 11:26 AM

I have a better than average minnesota cab that will need some work. $400 for whats left of the truck with cab. In northern MN. 72 also.

Putter · 12-30-2005, 01:08 PM

Drive on down to Jackson, MS. I have a '69 cab and a complete '71 truck. Both are non-air. Plus we have a junk yard with several...that's SEVERAL complete trucks in there.
You can take either one of mine for $300 (no doors included)
'69 has pin holes in the rockers and corners, but needs driver's kick panel starting several inches below the vent.
'71 I haven't really looked over but there is a hole in the floor on the driver's side.
Below are two pics I have of the cab....I can take better ones, but just to give you a rough idea.....that is the '69 cab in the background.

CHUCKER · 12-31-2005, 03:31 AM

i have a 71 cab low hump i'll take $100.00. does need some work

RShaips · 01-09-2006, 12:05 PM

How much work does it need?

Putter · 01-09-2006, 12:42 PM

Quote:

Originally Posted by RShaips

How much work does it need?

That sounded a lot like....
"Yo mama is so fat....."
{crowd} - "HOW FAT IS SHE?????"

RShaips · 01-09-2006, 12:46 PM

Yea I know, Yours looks decent, just too far for me!

724x4a/cchevy · 01-09-2006, 10:32 PM

you might talk to ron manes www.manestruckparts.com He usually has some good used parts. tell him "tow hook justin" sent ya (inside joke between me and ron)

MISTERSHOTGUN · 01-09-2006, 10:50 PM

I,m looking for a good cab as well only in east Texas not missouri. hopefully one with a title but one without will be ok if condition is nice. floor and rocker and cab corner rust would be expected and easy to fix. hopefully i'll find one without rust under the cowl or around the front windshield must be a big window.. any help here would be nice. thanks

teeitup · 01-10-2006, 12:21 AM

I still have one here in Kansas.

larry may · 01-10-2006, 09:24 PM

Quote:

Originally Posted by RShaips

Yea I know, Yours looks decent, just too far for me!

I have one down the road south from you . If you want to look at it . Will get you my phone number.

RShaips · 01-10-2006, 09:32 PM

Send it to me!

larry may · 01-10-2006, 10:03 PM

pm sent.Larry

Tynee · 01-13-2006, 04:20 PM

I have a '71 A/C Low hump cab currently located in Elizabethtown KY that could easily be gotten as close to you as Evansville, IN (or as far east as Lexington, KY BTW). That would be about 4 hours from you. Some of the work has already been done to the cab. It already has new floor boards and outer rockers, and I could be convinced to throw in new outer floorboards (still in box) and new cab corners all for the bargain basement price of $275. With the parts that are already installed and the parts included in the deal, the only other thing required would be a little bit of work around the windshield frame.

12-18-2005, 10:20 AM	#1
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Still looking for good cab in Missouri I know, nothing close to me but thought I'd post again. Anyway need a good 69-72 cab, high hump, low hump, a/c or not doesn't matter. Thanks

12-18-2005, 03:46 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Still looking for good cab in Missouri How good of cab are you looking for? This board is a good source,... but you probably won't find it in Missouri. Expect to replace rockers and cab corners at the very minimum. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-18-2005, 07:45 PM	#3
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri Well, of course I am looking for a perfect cab! But I am well aware of what is available. Don't mind paying for a good one, if I can find it.

12-18-2005, 09:11 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Still looking for good cab in Missouri sorry,... I had to go to Colorado to get mine AZ cab. Hope I didn't offend you. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-19-2005, 12:14 AM	#5
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri No problem! I'll find what I'm looking for eventually. Thanks

12-26-2005, 09:57 PM	#6
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri Still here

12-28-2005, 10:15 PM	#7
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,848	Re: Still looking for good cab in Missouri I might sale mine __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

12-28-2005, 11:12 PM	#8
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri PM sent

12-29-2005, 07:30 PM	#9
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: Still looking for good cab in Missouri I will be picking up a 67 small window soon. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

12-29-2005, 07:53 PM	#10
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri The truck is a 72 I really need a 69-72 cab. Thanks anyway

12-29-2005, 08:04 PM	#11
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	Re: Still looking for good cab in Missouri Sine we are "neighbors"...keep in mind I travel around quite a bit and can help bring you one if you find something you like that is out of state. Just thought I would extend the offer...I know finding a "good" cab in this state is going to be tough..... __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

12-30-2005, 12:52 AM	#12
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: Still looking for good cab in Missouri I have 2 nice non air cabs $400 each, in AZ both low hump. Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-30-2005, 11:26 AM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Still looking for good cab in Missouri I have a better than average minnesota cab that will need some work. $400 for whats left of the truck with cab. In northern MN. 72 also. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-30-2005, 01:08 PM	#14
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Still looking for good cab in Missouri Drive on down to Jackson, MS. I have a '69 cab and a complete '71 truck. Both are non-air. Plus we have a junk yard with several...that's SEVERAL complete trucks in there. You can take either one of mine for $300 (no doors included) '69 has pin holes in the rockers and corners, but needs driver's kick panel starting several inches below the vent. '71 I haven't really looked over but there is a hole in the floor on the driver's side. Below are two pics I have of the cab....I can take better ones, but just to give you a rough idea.....that is the '69 cab in the background. Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 12-30-2005 at 01:15 PM.

12-31-2005, 03:31 AM	#15
CHUCKER Registered User Join Date: Jun 2000 Location: LEE'S SUMMIT, MO. USA Posts: 246	Re: Still looking for good cab in Missouri i have a 71 cab low hump i'll take $100.00. does need some work __________________ 1972 K/20,4X4,454, dark olive 1937 General motors truck (big project) 2005 gmc envoy (wife's) 2003 2500hd ls, crewcab, 4x4, 360, hd 4spd automatic trans., Lee's summit, MO. S.E. of Kansas City,MO



Register or Log In To remove these advertisements.

01-09-2006, 12:05 PM	#16
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri How much work does it need?

01-09-2006, 12:46 PM	#18
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri Yea I know, Yours looks decent, just too far for me!

01-09-2006, 10:32 PM	#19
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: Still looking for good cab in Missouri you might talk to ron manes www.manestruckparts.com He usually has some good used parts. tell him "tow hook justin" sent ya (inside joke between me and ron)

01-09-2006, 10:50 PM	#20
MISTERSHOTGUN Registered User Join Date: Apr 2005 Posts: 95	Re: Still looking for good cab in Missouri I,m looking for a good cab as well only in east Texas not missouri. hopefully one with a title but one without will be ok if condition is nice. floor and rocker and cab corner rust would be expected and easy to fix. hopefully i'll find one without rust under the cowl or around the front windshield must be a big window.. any help here would be nice. thanks

01-10-2006, 12:21 AM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Still looking for good cab in Missouri I still have one here in Kansas. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-10-2006, 09:32 PM	#23
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri Send it to me!

01-10-2006, 10:03 PM	#24
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: Still looking for good cab in Missouri pm sent.Larry

01-13-2006, 04:20 PM	#25
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: Still looking for good cab in Missouri I have a '71 A/C Low hump cab currently located in Elizabethtown KY that could easily be gotten as close to you as Evansville, IN (or as far east as Lexington, KY BTW). That would be about 4 hours from you. Some of the work has already been done to the cab. It already has new floor boards and outer rockers, and I could be convinced to throw in new outer floorboards (still in box) and new cab corners all for the bargain basement price of $275. With the parts that are already installed and the parts included in the deal, the only other thing required would be a little bit of work around the windshield frame. __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT. Last edited by Tynee; 01-16-2006 at 01:16 PM.

Register or Log In To remove these advertisements.