The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Muncie (https://67-72chevytrucks.com/vboard/showthread.php?t=183478)

ozzyracing

12-20-2005 11:25 PM

Muncie

I currently have a 65 GMC with a 454 and a turbo 350. What will I need to install a Muncie M22 besides the transmission, money, time, and a new drive shaft?:fb:

1974gmc

12-21-2005 01:23 AM

Re: Muncie

manual tranny pedal assembly

ozzyracing

12-21-2005 12:33 PM

Re: Muncie

Is there a kit I can buy?

1974gmc

12-21-2005 05:56 PM

Re: Muncie

you will most likely have to go to a junkyard

jgrh64

12-22-2005 12:19 PM

Re: Muncie

a good clutch to last behind the big block, is that the rock crusher trans? it should be about the same length as the 350 ,watch the spline count on input and output shafts might be different on a rock crusher.is the motor drilled for pilot bushing/bearing? flywheel bellhousing starter maybe different.It's worth the work for play factor, gets tiresome on a daily driver.

All times are GMT -4. The time now is 09:10 PM.