WTB: Front gauge tin for vac/tach
 

I need a front gauge tin to complete my gauge rebuild.....I need one with the cutout for a vac gauge & tach. Well at least the vac cutout, I can cut the tach hole if needed. I can use paypal. Thanks, Greg

Re: WTB: Front gauge tin for vac/tach
 

ttt

Re: WTB: Front gauge tin for vac/tach
 

ttt

Re: WTB: Front gauge tin for vac/tach
 

Greg, I have cut a vac hole using a dremel tool and the end result comes out pretty good. You might want to give it a try if you can't find a correct original. You could also use one that was for air pressure as they had the hole you need. Good luck

Re: WTB: Front gauge tin for vac/tach
 

I cut mine using a dremel tool, and it lets in more light around it than I like. I would like to find one with the factory rolled edges on all four bottom holes. Greg

Re: WTB: Front gauge tin for vac/tach
 

ttt

Re: WTB: Front gauge tin for vac/tach
 

Greg,
I have one that I would part with for $25 plus shipping, but it is need of some work. I have already had it sandblasted and reprimed, but it is pitted in a few spots and will require some putty work to cover the pits. If you are interested in it I will get some pics of later today. Randy

Re: WTB: Front gauge tin for vac/tach
 

Send a pic or 2. May be interested. Greg

Re: WTB: Front gauge tin for vac/tach
 

Greg, I was really bussy this weekend and I will get a pic sent out to you later this evening or tomorrow. Randy

Re: WTB: Front gauge tin for vac/tach
 

Still looking, several people are not responding.