The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - Front sway bar on a 4wd (https://67-72chevytrucks.com/vboard/showthread.php?t=202714)

shelby987

06-15-2006 05:36 PM

Front sway bar on a 4wd

I went looking for a set of corp 10 bolt spring plates for my swap, when I did I noticed that they have a sway bar attached to them, has anyone done this upgrade? Is it worth it? Does the cross member for the sway bar bolt up directly?

Stocker

06-15-2006 08:40 PM

Re: Front sway bar on a 4wd

Can't answer your question, but as usual I do have an opinion! :) I am a big fan of swaybars for highway use, especially if you (A) tend to corner enthusiastically, or (B) sometimes carry large heavy loads. But I don't like 'em on 4WD trucks, if they are used off-road. Kills some of the suspension flex that you need over uneven terrain. Off-road guys will often use quick-disconnect end links so they can undo 'em for trails, and hook 'em back up for the road.

BobbyK

06-15-2006 10:08 PM

Re: Front sway bar on a 4wd

Put a sway bar in my 71 Blazer.
Here's the link to it in the FAQ section.
http://67-72chevytrucks.com/vboard/s...d.php?t=140216

All times are GMT -4. The time now is 05:15 AM.