The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)
-   -   4x4 front axel (https://67-72chevytrucks.com/vboard/showthread.php?t=203011)

wibilly 06-18-2006 09:52 AM

4x4 front axel
 
what are you 4wd guys using to replace the axel slingers {deverters} on your inner axel shafts to keep the sand and muck out of the axel tubes. these were discontinued by GM 14 years ago and i havent been able to locate a seal or replacement part any ideas? its a danna 44 3/4 ton

masterbeavis 06-18-2006 01:15 PM

Re: 4x4 front axel
 
I buy them from the parts house. http://www.partsamerica.com/ProductD...pe=914&ptset=A

pumpkin 06-18-2006 02:40 PM

Re: 4x4 front axel
 
I use old CV boots as seals. It seems to work marginally well. I do a lot of deep mud and water, and its the best fix I've come up with so far.

Blazer1970 06-18-2006 07:59 PM

Re: 4x4 front axel
 
All of the parts are available through your Spicer dealer.

wibilly 06-21-2006 12:38 AM

Re: 4x4 front axel
 
how do you locate a Spicer dealer?

Blazer1970 06-21-2006 07:30 AM

Re: 4x4 front axel
 
Most any shop that deals with medium and heavy duty truck drivelines sells Dana/Spicer stuff. There are also quite a few mail order and internet stores that sell this stuff. Randy's Ring and Pinion can probably sell you anything you need http://www.ring-pinion.com


All times are GMT -4. The time now is 03:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com