The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   rear axle codes (https://67-72chevytrucks.com/vboard/showthread.php?t=21378)

dmec 08-14-2002 05:39 PM

rear axle codes
 
i have located 2 5 lug rears and am trying to determine ratios. i have scraped crud off all over the housing and cant fint any codes. would help if i had an idea where to locate. tired of cleaning housings in junk yard. 1 of them had the rear cover off and i counted teeth on ring and pinion but numbers didnt figure right. 43 in ring 22 on pinion. any help would be appreciated.

john 08-14-2002 06:40 PM

Look on the pass. side tube about six in. out from housing and on the front side almost to the top. they are stamped no's and hard to see sometimes.:flag:

dmec 08-14-2002 07:35 PM

thanks john. saves a lot of scraping

paintpyro 08-15-2002 11:46 AM

Hey DMEC, Let me know if you come across a 3.07 that you dont want for yourself, I haven't found one yet around here. What ratio are you looking for?

dmec 08-15-2002 12:55 PM

ok paintpyro ill keep an eye out but pickings are getting mighty slim at pick a part. iim looking for 3.07 or 3.73. like to find a posi. went back this morning to try to check on axle code and someone had pulled the axles already. if you dont get it when you find it its gone. too much competetion. theres another complete leaf spring there but its setting on ground. havent taken the time or effort to jack it up scrape it and check vin in this heat.


All times are GMT -4. The time now is 08:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com