The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - WTB engine mounts and brake pedal (https://67-72chevytrucks.com/vboard/showthread.php?t=218328)

brak	12-03-2006 12:07 AM

WTB engine mounts and brake pedal

I'm currently looking for the following:

a set of V8 motor mounts in any condition.

Brake pedal assembly for an automatic pickup (truck used to have a manual tranny, with little pedal)

byrd	12-03-2006 12:11 AM

Re: WTB engine mounts and brake pedal

all of our year trucks have the small brake pedal, manual or not same size. The wider pedal was not introduced until 73 I believe.

brak	12-03-2006 12:13 AM

Re: WTB engine mounts and brake pedal

Quote:

Originally Posted by byrd (Post 1922457)

all of our year trucks have the small brake pedal, manual or not same size. The wider pedal was not introduced until 73 I believe.

Good to know.

Thanks

Aarons72s

12-03-2006 01:21 AM

Re: WTB engine mounts and brake pedal

I have a set out back. You are talking about the brackets that go on the frame right? I can get you a pick if you would like. And if they are to your liking how about $25.00 shipped to your door? If you want some pics pm me and i will get some tomorrow.
Aaron

brak	12-03-2006 01:24 AM

Re: WTB engine mounts and brake pedal

Quote:

Originally Posted by Aarons72s (Post 1922516)

Yes. I am looking for the "towers" that bolt to the frame.

As long as they fit in the factory V8 position, i'll take them.
my motor is currently mounted in the Inline 6 position.

thanks

Aarons72s

12-03-2006 01:44 PM

Re: WTB engine mounts and brake pedal

Here are te picks for you. They are ok. I got a pick with them on the old cross member and mocked up on my chassis in the correct postion. Those photos should help when you install them to as they are different for each side. Ill pm you with the rest of the details.

4bynut

12-03-2006 10:50 PM

Re: WTB engine mounts and brake pedal

I should have a extra auto brake pedal setup i'll sell. And also a set of V8 mounts. I can check tomorrow for you. Thanks Jason

mkhutch

12-03-2006 11:14 PM

Re: WTB engine mounts and brake pedal

Aren't those the Big Block towers?

Aarons72s

12-04-2006 02:08 AM

Re: WTB engine mounts and brake pedal

No they are sb towers. I pulled the sb towers for my orange and white to make sure they were correct. Yes they do look similar. I should have took a pick of the 68-71 bb mounts when I had the chance but didnt.

454_72_4X4

12-04-2006 05:13 PM

Re: WTB engine mounts and brake pedal

I've got a auto pedal assembly I'd trade for a stick pedal assembly.
I could,ve swore the pedal was wider than the stick brake pedal. I'll go take a second look.

brak	12-06-2006 11:46 AM

Re: WTB engine mounts and brake pedal

Quote:

Originally Posted by 454_72_4X4 (Post 1926288)

I've got a auto pedal assembly I'd trade for a stick pedal assembly.
I could,ve swore the pedal was wider than the stick brake pedal. I'll go take a second look.

if it is wider, then you have a deal, otherwise i'll stick with what i have.

popular opinion states that that was one of the many changes for 73

Shane

12-06-2006 12:18 PM

Re: WTB engine mounts and brake pedal

The pedals are the same.

Take the clutch pedal off the assembly and you have an auto brake set up.

454_72_4X4

12-08-2006 02:14 PM

Re: WTB engine mounts and brake pedal

Quote:

Originally Posted by brak (Post 1930114)

if it is wider, then you have a deal, otherwise i'll stick with what i have.

popular opinion states that that was one of the many changes for 73

Popular opinion is right. My pedal was just wrapped up in tape, (protection from media blasting), and it made it appear wider.

All times are GMT -4. The time now is 03:00 AM.