350 SBC - 4 Bolt Main
 

Pulled a 350 out of a 76 van this summer, and don't have a use for it right now. the casting number is 3970010 and I have pulled the pan to confirm that it is a 4 bolt main. I checked the head casting number (don't have it handy) and 2.02 was an option for the casting number, but i have not pulled the heads to confirm it.

When pulled it ran perfectly. Since being pulled, the distributor was pulled and replaced with a junk one to keep the motor sealed. the carb has been pulled and the intake had a rag stuffed in it to keep junk out.

It had about 140k on it when pulled, but didn't smoke.

Looking to get $450 out of it. Can't ship this one, but would be willing to make a couple hour drive to meet you, or deliver it. You just pay for gas.

Re: 350 SBC - 4 Bolt Main
 

the head casting number is 462624

mortec details: 462624.....75-86...350/400......76cc chamber, 1.72/1.5, 1.94/1.5 or 2.02/1.6 valves

I will get the engine code the next time i'm out where i have the engine stored.

350 SBC - 4 Bolt Main
 

Pulled a 350 out of a 76 van this summer, and don't have a use for it right now. the casting number is 3970010 and I have pulled the pan to confirm that it is a 4 bolt main. I checked the head casting number and 2.02 was an option for the casting number, but i have not pulled the heads to confirm it.

the head casting number is 462624

mortec details: 462624.....75-86...350/400......76cc chamber, 1.72/1.5, 1.94/1.5 or 2.02/1.6 valves

I will get the engine code the next time i'm out where i have the engine stored.

When pulled it ran perfectly. Since being pulled, the distributor was pulled and replaced with a junk one to keep the motor sealed. the carb has been pulled and the intake had a rag stuffed in it to keep junk out.

It had about 140k on it when pulled, but didn't smoke.

Looking to get $450 out of it. Can't ship this one, but would be willing to make a couple hour drive to meet you, or deliver it. You just pay for gas.

Re: 350 SBC - 4 Bolt Main
 

That's a great foundation for a build! Too bad I'm in Seattle :(

Re: 350 SBC - 4 Bolt Main
 

heh, yeah, shipping probably wouldn't to great on this one.

Re: 350 SBC - 4 Bolt Main
 

Threads merged. Please do not cross post.

Thanks :cool:

Re: 350 SBC - 4 Bolt Main
 

11 month bump. - price reduced - $375