|
12-12-2006, 11:05 PM
|
#1 |
|
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
350 SBC - 4 Bolt Main
Pulled a 350 out of a 76 van this summer, and don't have a use for it right now. the casting number is 3970010 and I have pulled the pan to confirm that it is a 4 bolt main. I checked the head casting number (don't have it handy) and 2.02 was an option for the casting number, but i have not pulled the heads to confirm it.
When pulled it ran perfectly. Since being pulled, the distributor was pulled and replaced with a junk one to keep the motor sealed. the carb has been pulled and the intake had a rag stuffed in it to keep junk out. It had about 140k on it when pulled, but didn't smoke. Looking to get $450 out of it. Can't ship this one, but would be willing to make a couple hour drive to meet you, or deliver it. You just pay for gas. |
|
|
|
12-12-2006, 11:45 PM
|
#2 |
|
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
Re: 350 SBC - 4 Bolt Main
the head casting number is 462624
mortec details: 462624.....75-86...350/400......76cc chamber, 1.72/1.5, 1.94/1.5 or 2.02/1.6 valves I will get the engine code the next time i'm out where i have the engine stored. |
|
|
|
|
12-13-2006, 02:20 AM
|
#3 |
|
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
350 SBC - 4 Bolt Main
Pulled a 350 out of a 76 van this summer, and don't have a use for it right now. the casting number is 3970010 and I have pulled the pan to confirm that it is a 4 bolt main. I checked the head casting number and 2.02 was an option for the casting number, but i have not pulled the heads to confirm it.
the head casting number is 462624 mortec details: 462624.....75-86...350/400......76cc chamber, 1.72/1.5, 1.94/1.5 or 2.02/1.6 valves I will get the engine code the next time i'm out where i have the engine stored. When pulled it ran perfectly. Since being pulled, the distributor was pulled and replaced with a junk one to keep the motor sealed. the carb has been pulled and the intake had a rag stuffed in it to keep junk out. It had about 140k on it when pulled, but didn't smoke. Looking to get $450 out of it. Can't ship this one, but would be willing to make a couple hour drive to meet you, or deliver it. You just pay for gas. |
|
|
|
|
12-20-2006, 01:12 AM
|
#4 |
|
Account Suspended
Join Date: Sep 2005
Location: Monroe, WA
Posts: 3,814
|
Re: 350 SBC - 4 Bolt Main
That's a great foundation for a build! Too bad I'm in Seattle
|
|
|
|
|
01-01-2007, 03:16 AM
|
#5 |
|
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
Re: 350 SBC - 4 Bolt Main
heh, yeah, shipping probably wouldn't to great on this one.
|
|
|
|
|
01-11-2007, 11:47 PM
|
#6 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,733
|
Re: 350 SBC - 4 Bolt Main
Threads merged. Please do not cross post.
Thanks 
|
|
|
|
|
12-05-2007, 11:49 PM
|
#7 |
|
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
Re: 350 SBC - 4 Bolt Main
11 month bump. - price reduced - $375
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
