HELP! 64, need to get ignition out.
 

anyway. i bought a new wiring harness and key and all that noise, and i need that damn key out. and i dont have a key.

so yeah. my streering wheel is a tilt wheel, i dont know if that matters, but someone was telling me that 64s werent avail with tilt, so i might be sol. haha let me know, im lost.

Re: HELP! 64, need to get ignition out.
 

Depending on what year the column is will depend on how the key cylinder comes out, most of the locks in columns have the release inside, which means you will need to pull the steeringwheel to get to it. If you just want to get the key out, try a hack saw blade. Just trim the smooth side of the blade down till it is pretty thin, and you should be able to fish it out.

Re: HELP! 64, need to get ignition out.
 

if it is drivable take it to a looksmith they can get it out.

Re: HELP! 64, need to get ignition out.
 

Are you talking about the stock 64 ignition or are you talking about a steering column ignition?

Re: HELP! 64, need to get ignition out.
 

If the key is in the colum you can pull the wheel and remove a phillips head screw and it will come out. Some you will need to remove the lockkplate. It's held in place by a lock ring. It's actually really easy. Auto Zone should rent all the tools you ned.

Re: HELP! 64, need to get ignition out.
 

yeah, ill have to take the time to take some pictures tomorrow to show you what im talking about

Re: HELP! 64, need to get ignition out.
 

Did you get it out?

Re: HELP! 64, need to get ignition out.
 

no, sure didn't. i dont know have key for it. and i have no clue what the hell is going on. haha.

Re: HELP! 64, need to get ignition out.
 

On a 64 isn't the key in the insert? Can you take the whole dash insert out?

Re: HELP! 64, need to get ignition out.
 

um like i said in the first post, i dont think its a standard 64 ignition. mines on the steering colum.

Re: HELP! 64, need to get ignition out.
 

Have you tried a lock smith?? Cost me about $15 when I lost the keys to my "55 Chevy Sedan... They made me 2 keys and it only took about 15 minutes from the time the guy started, to the time I walked out the door...

I was soo bummed because I lost the ORIGINAL keys.. They were paper thin and worn down to almost just a stub..

Anywho, lock smiths have master keys. They'll try one, then the next one, then the next one, then the next one, then the next, then the next, then the next, then the next, then the next, then the next, then the next, then the next, then the next, then the next, then the next, then the next, then the next.......
You get the point...

Elias
Eh-lee-us
or "E"

Re: HELP! 64, need to get ignition out.
 

Then it should be like i put in the other post