The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Downshift cable adjust (https://67-72chevytrucks.com/vboard/showthread.php?t=222500)

dacanuck

01-09-2007 10:44 AM

Downshift cable adjust

What's the proper way to adjust my downshift cable on my 86 with a TH350? Since I've put my Holley on it won't downshift at full throttle.

lurch115

01-10-2007 12:27 AM

Re: Downshift cable adjust

won't down shift?? or up shift???? if it doesn't down shift you need to push the the button down and open the throttle all the way (with the engine shut off) and if you do that and there is still slack in the cable...you need to push the button and push the cable back in by hand and repeat the process again

dacanuck

01-10-2007 10:28 PM

Re: Downshift cable adjust

There's no button...just a screw on stop in front of the throttle lever on the carb. It's a TH350, so it's not a TV cable like on TH400's or TH700's. This cable only controls downshifts.

dacanuck

01-23-2007 01:33 PM

Re: Downshift cable adjust

Can someone post or email me a pic of a factory cable for a TH350 trans? I'm starting to think the transmission shop put on a universal aftermarket one instead of a OE unit.

All times are GMT -4. The time now is 07:02 AM.