The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - contol arm shafts (https://67-72chevytrucks.com/vboard/showthread.php?t=232305)

creeldaddy

03-19-2007 07:38 PM

contol arm shafts

how do you remove the control arm shafts looks like just a nut on both ends but i cant get them to budge used wd40 out the wazzoo am i just missing something or whut:confused:

twotrucks

03-19-2007 07:48 PM

Re: contol arm shafts

The shaft screws into the nut on both end and the nut threads into the the arm. They will take some serious effort to bust loose especially if they haven't been greased regularly and are rusty. I had to use some pipe for cheater bars.

RACINJASON22

03-19-2007 11:39 PM

Re: contol arm shafts

Good to know because I didn't. RJ22

AR15DEFENSE

03-19-2007 11:54 PM

Re: contol arm shafts

I just did this last night on my 72 c20. It was a pain, but a little PB Blaster and 2 feet of pipe on the end of my ratchet and I was in business. have fun!

dingo_dan_22

03-20-2007 12:05 AM

Re: contol arm shafts

I put the shafts in the vice then used the impact gun. Easy as pie.

All times are GMT -4. The time now is 08:48 PM.