I have a problem
 

We'll after I got done tacking up the bars on the wishbone (The frame was around ride height) I let the air out and the tacks on the bar cracked. When the frame goes up and down the bars twist mabe 3/8. Is this normal? Do I just weld it up and let the bushings take all the stress? It seems like the two links on the frame twist in toward eachother when you dump it. What do you guys think.

Re: I have a problem
 

forhot the pics

Re: I have a problem
 

They're binding because the front two pivots are at an angle and the rear pivot is not. If you change the front two pivots to being parallell to the one on the diff. your problem will be solved.