The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Drop question (https://67-72chevytrucks.com/vboard/showthread.php?t=241468)

CG	05-17-2007 11:22 PM

Drop question

If I drop my panel 6" in the rear am I going to have problems with the cross member or bearing with the two piece drive shaft? I am putting in one of those bolt in c notches, so I have that part covered. Hoping I dont need a drop cross member. Or maybe flipping it would help?

Mark

Hart_Rod

05-18-2007 08:01 AM

Re: Drop question

3 Attachment(s)

CG, I'm running bags, 2" blocks and a CPP bolt in C-notch on my Surburban and haven't had any drive shaft issues. You will need to run shock relocators, though.

CG	05-18-2007 09:38 AM

Re: Drop question

Thanks Rob, I have all the usual stuff I need...notches, shock relocaters, adjustable panhard bar etc etc...Just wanted to make sure there weren't going to be any problems I haven't foreseen as this thing is finally starting to go together.

Mark

All times are GMT -4. The time now is 01:35 AM.