The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Replacing vent glass question.... (https://67-72chevytrucks.com/vboard/showthread.php?t=241824)

gregbr 05-20-2007 06:52 PM

Replacing vent glass question....
 
How do you remove the old glass from the vent window frame? I need to rechrome the frame then install new glass. Any help on removing or installing the vent glass would be nice. I have new glass setting rubber tape or whatever you call it. Thanks

JimKshortstep4x4 05-20-2007 08:24 PM

Re: Replacing vent glass question....
 
I wet the glass/rubber down with a soap solution and then pull the glass out starting at the top. Sometimes I have had to pry the glass out out using a smooth screw driver with rounded edges to get the glass started out.

On installing the glass I apply the tape to the glass, soap it down and then pound it into the frame with a rubber hammer.

Jim


All times are GMT -4. The time now is 04:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com