WTB Carrier bearing bracket
 

(Picture below) I need a carrier bearing bracket like the one used on the heavier duty trucks, not the light duty ones. The one I'm talking about mounts to the bottom of the trailing arm crossmember not the top. Any help would be appreciated.

Re: WTB Carrier bearing bracket
 

Would a 3/4Ton have one? I may have one if so...

Re: WTB Carrier bearing bracket
 

I have replaced it on my longhorn, and no one seem to have it. Finally bought it at NAPA autoparts. 12 bucks hope that helps.

Re: WTB Carrier bearing bracket
 

The mount or the carrier bearing?

Re: WTB Carrier bearing bracket
 

I'm understanding that you need the carrier bearing mount, Correct?

Re: WTB Carrier bearing bracket
 

Correct, I added a picture and circled what I'm talking about. Thanks for the replies.

R

Re: WTB Carrier bearing bracket
 

I'm headed out to my parts trucks this afternoon... So, If a 3/4T would be correct, I can pull it off this afternoon...

Re: WTB Carrier bearing bracket
 

If it rivitted to the bottom of the crossmember it is correct. Thanks and let me know.

R

Re: WTB Carrier bearing bracket
 

Rob, My C20 mounts from the top. What model are you searching for? I am going to do some work at a local bone yard Sat. and if you let me know I will check out what they have while I am there. Let me know, Lane

Re: WTB Carrier bearing bracket
 

I'm not sure what model i came on, but it mounts like the picture above.

Re: WTB Carrier bearing bracket
 

Save yourself the trouble guys, I already ground one out for you Rob.
I will get it out to you ASAP. Talk to you soon, Mike

Re: WTB Carrier bearing bracket
 

Thanks Mike!!

Re: WTB Carrier bearing bracket
 

That was FUN. It looked like the 4th of July in May! Had to use the little Makita grinder, the big Hitachi grinder and the cut off tool to get that from between all those brackets and stuff! Tim Taylor would be PROUD! Will send it to you as soon as I can Rob. Take care, Mike