The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   Manual lock-out hubs (https://67-72chevytrucks.com/vboard/showthread.php?t=245961)

pat 06-18-2007 03:48 PM

Manual lock-out hubs
 
Ive got an 89 Jimmy, Id like to put some manual hubs on it. How much would these help mileage? Where can I find them and how much should I expect to pay for them?

rcbildr 06-18-2007 08:35 PM

Re: Manual lock-out hubs
 
I did a search on Google for Warn Hubs and found a pair for approximately $90. I didn't really notice a change in mileage afterwards.

pat 06-18-2007 10:46 PM

Re: Manual lock-out hubs
 
http://cgi.ebay.com/ebaymotors/New-S...mZ150087726160

Would I need more than this?

rcbildr 06-19-2007 12:45 AM

Re: Manual lock-out hubs
 
I don't think so..other than tools. You will need a set of snap ring pliers and maybe a good set of picks (sp?). One thing you might want to consider when you swap them out is to check (and maybe grease) your wheel bearings and make sure the spindle nut is properly torqued. You will need to buy a spindle nut socket for that...any auto parts store should have one. I ran in to that problem when I installed my hubs, both spindle nuts were very loose.

pat 06-19-2007 04:02 PM

Re: Manual lock-out hubs
 
Good info
Thanks!


All times are GMT -4. The time now is 08:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com