The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   brake light (https://67-72chevytrucks.com/vboard/showthread.php?t=247168)

1983shorty 06-26-2007 04:28 PM

brake light
 
the brake light is on on my 83 . every once in awhile the pedal goes down a little farther than normal and the brake light comes on . stays on until the next time the pedal goes down farther than normal , then it goes out. new pads and rotors . brakes work " good " . never have worked "great" since i had the truck. i suspect the master cyl may have an internal seal going bad ? what do you guys think ?

Bus Ted Knuckle 06-26-2007 06:01 PM

Re: brake light
 
If your not loosing fluid, it is probably the MC.

1983shorty 06-26-2007 07:14 PM

Re: brake light
 
nope , not losing a drop of fluid. i am pretty sure its the MC i guess i just want a little validation before i spends the $$$

gchemist 06-26-2007 07:40 PM

Re: brake light
 
I have the same problem with my 83. Happens only then I hit the brakes really hard. Truck stops on a dime!!

Yankeelights 06-26-2007 10:46 PM

Re: brake light
 
Yup, sounds like an internal seal in the master.

bigblock79 06-26-2007 11:28 PM

Re: brake light
 
MC it sounds like to me

xtreme80 06-27-2007 02:12 AM

Re: brake light
 
Definately a master cylinder. Mine did the same thing. Only problem is my brake light never went out.

Front to back, my entire brake system is brand new. Still the light on the dash wouldn't go out.

I took out the bulb :)

Captkaos 06-27-2007 05:04 PM

Re: brake light
 
Quote:

Originally Posted by xtreme80 (Post 2240232)
Front to back, my entire brake system is brand new. Still the light on the dash wouldn't go out.

I took out the bulb :)

You can adjust the tab that holds the plunger to make it not stay on. Just screw it up onto the bracket.

xtreme80 06-27-2007 07:52 PM

Re: brake light
 
Quote:

Originally Posted by Captkaos (Post 2241096)
You can adjust the tab that holds the plunger to make it not stay on. Just screw it up onto the bracket.

Sweet! Didn't know that! I'll give it a try tonight and let you know.


All times are GMT -4. The time now is 03:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com