The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - I need some measurements. (https://67-72chevytrucks.com/vboard/showthread.php?t=248883)

BarryB

07-09-2007 06:02 PM

I need some measurements.

I need to know the size of the axle size on a 2 or 4wd drive truck. Aslong as it is 6 lug. I need the measurement of the part that sticks out in the center of the brake drum. I am thinking it is right at 3.5" across.

EFI70Blazer

07-09-2007 06:30 PM

Re: I need some measurements.

My 4x4 axle is 3.5" across where the center of the drum would slip over.

BarryB

07-09-2007 09:58 PM

Re: I need some measurements.

Thanks EFI70BLAZER, Cool I just scored some wheels and tires and was curious of the fit. The center holes are just over 3.5" so they should fit right on.

All times are GMT -4. The time now is 09:06 PM.