The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - 6" lift ? (https://67-72chevytrucks.com/vboard/showthread.php?t=251291)

AMD6769

07-25-2007 11:54 PM

6" lift ?

I installed the lift kit on the 72 blazer and the drive lines look like they will bind. Do any body know what chimes to use on a 6in lift on front and back first time ever building a 4x4 so Im learning didnot get any from rough country new spring all around. thanks jaime

special-K

07-26-2007 04:39 AM

Re: 6" lift ?

I didn`t use any on a longbed.I think a Blazer rear could use a shim,though.

Mudder

07-26-2007 07:07 AM

Re: 6" lift ?

I used a shim on the rear and have lowered my transfer case and I still have a vibration when I stand on it hard taking off. Not sure what it is yet. Had a shop here do new ujoints in the rear driveshaft before Norwood so gonna check out and make sure they got it back together right.

special-K

07-26-2007 07:59 AM

Re: 6" lift ?

I had to lengthen my rear driveshaft.If the splines aren`t mated enough it will allow driveshaft wobble.I`m sure that`s been checked,though.

All times are GMT -4. The time now is 12:58 AM.