The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   tilt column questions (https://67-72chevytrucks.com/vboard/showthread.php?t=254087)

Longhorn Man 08-15-2007 04:24 PM

tilt column questions
 
Hey guys, question for the 73 - 87 experts...
Are the tilt columns worth much to you guys?
Did they chainge at all in the 14 years they run this body style?
If so, when was the break, and what was the chainge? (I'd guess wiper switch)

Any added info I forgot to ask would be cool.

I see quite a few of these tilts in the local yards, and plenty of them are even tight... so i wanted to see if there was any money to be made on this.

Jonboy 08-15-2007 05:54 PM

Re: tilt column questions
 
They are basically the same, but had two major changes. In 77 or 78, the main plug on the side was changed, but is easy to swap. If you are going to grab one out of a junkyard, just cut the wiring harness after the main long plug on the side of the column. The wipers went to the turn signal stalk in 84. Also, if you find a floor shift tilt column, those are more desirable to some folks looking to convert to floor shift.

Eyegore 08-15-2007 06:09 PM

Re: tilt column questions
 
I'd just pull some out and put them on e*ay or craigslist and see what kind of action you get. One thing though, i would not cut the harness, remove them at their connections, I say this because if i were a buyer i'd rather plug it in instead of splicing wires. Also get a variety w/ and w/o cruise control and I think the headlights on the column are more desired than the floor one.

So there's my 2 cents, hope it helps.

Jonboy 08-15-2007 06:11 PM

Re: tilt column questions
 
I meant cut the harness of the donor truck, to get extra wiring. Don't cut teh wiring going into the column.

Longhorn Man 08-15-2007 06:20 PM

Re: tilt column questions
 
all good info.
Ball park, what are they worth... am i lookin at 100 bucks, or would you guys only wanna pay like 50 - 75?

Eyegore 08-15-2007 06:59 PM

Re: tilt column questions
 
I've seen here on c/l for 125

Srubydo1986 08-15-2007 07:00 PM

Re: tilt column questions
 
id give 50-100 but my truck already has one and a guy gave me another so im set if i ever need another. Wish it would fit a 1970 chevelle but it would look odd not being metal.


All times are GMT -4. The time now is 02:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com