flip kit..hows it work?
 

http://i4.photobucket.com/albums/y12...e/100_2431.jpg
i got these parts,i do have 2 of each plus shock mounts.i know i need a c notch too.but there is no instructions on how to flip the rearend on top of the springs.i got these from a friend who didnt use them off a 2000 silverado.i was hopeing they would work on my 64.since it to has leafs.any ideas,suggestions would be appreciated.

Re: flip kit..hows it work?
 

not sure on the 64.
Here's a link to djm install instructions, It's pretty easy, at least on my 86 it was.
http://www.djmsuspension.com/Instruc...p/FK1024-5.pdf

Re: flip kit..hows it work?
 

thanks, now for some reading....
if i got longer u bolts,would it be safe to add a 1 or 2 inch block?

Re: flip kit..hows it work?
 

if i got longer u bolts,would it be safe to add a 1 or 2 inch block?[/QUOTE]
It has been done many times before so I think you will be good.
Jack

Re: flip kit..hows it work?
 

what about the spring perches???do i cut them off?or???

Re: flip kit..hows it work?
 

Some flip kits use them to set pinion angle with the new parts. If your kit doesn't you can leave them or cut them off.
Jack

Re: flip kit..hows it work?
 

i dont think this kit does use them.kit is a lose term since it came off a truck that was switching to bags.guess i'll have to just do it and see what happens.