Desktop Dyno Please
 

Could someone desktop dyno this combo for me.

350 SBC, .030 overbore
10:1 Flattop pistons
76cc stock heads, 9.5:1 compression
1.94int./1.50exh. valves
Cam Comp Cams XE256 12-234-2 with 212/218 degrees of duration, .447/.454" of lift, 256/268 degrees of advertised duration, and 110 degrees of lobe seperation
HEI distrbutor
Edelbrock Preformer intake
Carter Carb, 600cfm
Stock Exhaust Manifolds
2.25" dual exhaust with dynomax mufflers

Thanks
And is there anything else I could do to make it have more power.
Eagle

It shows 292 HP at 5000k and 380 ft/lbs. torque at 3000rpm. It will be a good torque machine. Headers, etc will be required to get that HP up.

I come up with...263@4500 HP and torque 370@3000 rpm