The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Exhuast headers question (https://67-72chevytrucks.com/vboard/showthread.php?t=261407)

tominator67 10-06-2007 04:57 PM

Exhuast headers question
 
If I install headers on my 283 what will i do about the alternator support thats built into the manifolds?

Big White GMC 10-06-2007 05:10 PM

Re: Exhuast headers question
 
Most Performance Catalogs Have A Bracket That Works For That Situation . Summit, Jegs, And The Other Companies Sell Them With The Exhaust Kits. Those Headers Will Help That 283 Breath. Good Luck !!

BCOWANWHEELS 10-06-2007 09:41 PM

Re: Exhuast headers question
 
you could swap your cyl. heads for the 305 ho heads and upgrade your engine and then have accessorie bolt holes. good swap for a 283

Gray Ghost 10-06-2007 11:05 PM

Re: Exhuast headers question
 
I made one from an old stock manifold stud [2" long I think] and two nuts on an Elky once. The two nuts are spun on together right where the mount needs to be. Not sure what your bracket needs to be shaped like, but if it was bolted right to the manifold that should work well for you.


All times are GMT -4. The time now is 05:59 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com