Carb Return spring kit info needed
 

Has anyone used this setup? If so, do you have a picture or better yet, instructions on how to install?

http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=013


thanks......

Re: Carb Return spring kit info needed
 

I bought mine from Summit Racing and it came with instructions. Basically the bracket bolts to the carb base and faces forward. The bushings go in the large hole on the throttle arm with a bolt and another bracket. The springs attach to the bracket that bolts to the base and smaller bracket on the arm.

I don't have pictures with me, but I can take a few this evening and post them...

It works "OK"-the biggest pain in the rear was getting the springs installed.

Brian

Re: Carb Return spring kit info needed
 

Yes, if you could post pics, that would be great.......

Re: Carb Return spring kit info needed
 

I will get some on tonight...

Brian

Re: Carb Return spring kit info needed
 

Here are some pictures of mine. The carb is a Holley 1850-3 and the manifold is an Edelbrock Performer 2-0.

Brian

Re: Carb Return spring kit info needed
 

IMHO those are the best design for return springs ever. they dont wear out the shaft and are accurate. except I would mount the throttle cable to the large hole for a less touchy pedal. i had the same setup on my 80K20 with a highly modified 4776. it worked flawlessly.

Re: Carb Return spring kit info needed
 

Thanks Brian.....that really helps......

Re: Carb Return spring kit info needed
 

If you buy it and still need the instructions, I can fax them to you.

Brian

Re: Carb Return spring kit info needed
 

I already had bought it. I'll go by the pictures. If I need the instructions, I'll let you know.

thanks again......

Re: Carb Return spring kit info needed
 

Got it installed just now......Works great. Only hard part, was putting on the springs. They were a bear!!

Re: Carb Return spring kit info needed
 

Looks good. See...I told you they were a pain in the rear...LOL

Re: Carb Return spring kit info needed
 

My return spring broke this morning on the way to work and the revs shot up to 4K... I could tap it back, so I limped to Walmart (the only place I could find at 7:30...) and bought a small bungie cord and some duct tape. It was a quick fix, and worked great, but the dual spring setup has real appeal for me after the sound of my engine screaming.

Re: Carb Return spring kit info needed
 

But, as they say.....If you can't fix it....duck it......

Re: Carb Return spring kit info needed
 

Man, that set up came out sweet, I have Lokar cables on mine, but I like the idea of my springs not wearing out my shaft, I'll have to put it on the todo list. Thanks for the idea

Re: Carb Return spring kit info needed
 

Looks good Steve!. Where did you get it?

Re: Carb Return spring kit info needed
 

I have the same setup bought it from summit I love it

Re: Carb Return spring kit info needed
 

Do you happen to have a pic of the whole engine?

Re: Carb Return spring kit info needed
 

Forth coming. I haven't finished getting all the parts on yet. I have completely changed the look of this engine. "70c10 :bling2:" will not let me live it down either.

Re: Carb Return spring kit info needed
 

This is where I got mine. Fast shipping also.....

http://cgi.ebay.com/ebaymotors/CARB-...QQcmdZViewItem