The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Seat Belt bolt holes? (https://67-72chevytrucks.com/vboard/showthread.php?t=266580)

muddpile

11-15-2007 12:39 AM

Seat Belt bolt holes?

I need a small favor from someone. I had to replace so much of my floor, that somewhere in the shuffle I forgot to put in seat belt holes. I have the ones for the center belt and inner buckles, but I need the ones for the outer driver passennger parts. Can someone please measure from the back of the cab wall and from the door weatherstrip or something for me please? Thanks!

centsless

11-15-2007 06:47 AM

Re: Seat Belt bolt holes?

The seat belt bolts to the rear cab support. There is a welded nut on the front edge of the support. Look underneath the floor and punch the hole from the bottom.

BACKYARD88

11-15-2007 10:52 AM

Re: Seat Belt bolt holes?

:agree: that's how I did my last set.

muddpile

11-15-2007 04:08 PM

Re: Seat Belt bolt holes?

I replaced the floor and the rear cab supports, so right now there is nothing... The nut was actually broken off originally from rust.

BACKYARD88

11-15-2007 04:19 PM

Re: Seat Belt bolt holes?

OIC. If no one else does it I'll measure mine when I get home.

BACKYARD88

11-15-2007 06:41 PM

Re: Seat Belt bolt holes?

OK. Mine are 6 3/4" from the back wall and 2" from the inside of the weatherstrip flange, both sides.

muddpile

11-16-2007 12:46 AM

Re: Seat Belt bolt holes?

Thanks man! That's in the area I figured, but now I know for sure. Carpet will go in ASAP now.

All times are GMT -4. The time now is 11:58 AM.