The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   engine decode help (https://67-72chevytrucks.com/vboard/showthread.php?t=266653)

xshadow 11-15-2007 06:56 PM

engine decode help
 
on the front of the engine the number is
v1010zdd can someone help decode it. below the number is ejk but the J could be a U or ?

The heads are 462624. I wanted to find out if there is anything special about the heads. I know there not hump heads, but are they better than the average head...... and what size engine it is...year ect.

xshadow 11-15-2007 07:09 PM

Re: engine decode help
 
Maybe an 1981 corvette engine??

71chevylowrider 11-15-2007 07:28 PM

Re: engine decode help
 
Not sure if you have all the numbers you need, here's where allot of us get the correct info for blocks & heads.

http://www.mortec.com/

myoldchevytruck 11-15-2007 07:33 PM

Re: engine decode help
 
:agree: mortec is a great website

xshadow 11-15-2007 07:36 PM

Re: engine decode help
 
I went to this site:
http://www.nastyz28.com/chevy-engine-code-stampings.php

If i'm reading it right it looks like a 1981 engine V= flint 10=october 10= 10th day ZDD=1981 190 hp manual trans 4bbl vette?????????????????????
There is a picture near the bottom that looks like where I got my number from. In the picture it has a number that starts with the V like mine....
What I'm confused about is
On the back of the block on the drivers side there is a place that looks like a vin number stamped on it it would decode it as a 72 1/2 ton pickup balitmore IF it is really a vin number for our trucks stamped ino the back of the block. There is a smooth area kinda oval maybe 2" long with the cce142b....number stamped in it.

xshadow 11-15-2007 07:44 PM

Re: engine decode help
 
The heads look like 75-86 350/400 76cc chamber. Is a 76cc chamber good?

factorystock 11-15-2007 08:32 PM

Re: engine decode help
 
The dd on the block corresponds to a 1969 307 2bbl 200hp.

xshadow 11-15-2007 10:56 PM

Re: engine decode help
 
I see but what would the Z be for? and the heads are for a 75-86?
I was looking at decoding the entire thing...
V.....Flint
10....october
10....10th day
the rest is ZDD??
I see ZDD as 81 350 M/T 190 hp vette?
That would go along with the heads being 1975-1986
I'm only going by what the website looks like so I'm not sure..
would there be any other place on the block that would tell me the date? So I can see if it's dated around 69 or 81?
Over the years the heads could have been changed?


All times are GMT -4. The time now is 09:11 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com