Changing out stock tank w/ new one ?s
 

Okay, got my new tank, sending unit, etc and will be doing this tomorrow. Couple of questions, though:

1. Does anything need to be put on the new filler grommet for sealing purposes?
2. I've read about making sure the sender is sealed well. Any tips/tricks to making this happen?

Thanks. sb

Re: Changing out stock tank w/ new one ?s
 

Are you talking about the o-ring that gets sandwiched between the sender and tank?

Re: Changing out stock tank w/ new one ?s
 

Yeah, some had mentioned to make certain this gets a good seal. Also curious if the grommet on the cab needs any sealer or if it seals itself and doesn't allow moisture into the cab.

Re: Changing out stock tank w/ new one ?s
 

Lube the O-ring for the sending unit.It should be tight when you turn it.Be careful it doesn't bunch up or get pinched. On the grommet you will need
1.LOTS OF PATIENCE
2.Lube-I think most use dish soap.
3.A couple cold ones to celebrate with once you complete this task.