The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=38)

- - Drip Molding (https://67-72chevytrucks.com/vboard/showthread.php?t=273326)

jasonj6090

01-09-2008 04:09 PM

Drip Molding

i just cleaned up the drip molding on my cab can anyone tell me what to seal it whit

JimKshortstep4x4

01-09-2008 11:18 PM

Re: Drip Molding

There are a few products available and preparation is very important.

Here is a link to an article on seam sealing and it compares different products as well as application techniques.

http://autobodystore.com/forum/showthread.php?t=7467

I used 3M's "Ultrapro" on the last cab that I did and so far it is holding up well.

Jim

69panel

01-12-2008 04:43 AM

Re: Drip Molding

The 3M self leveling is what I prefer.

All times are GMT -4. The time now is 06:52 AM.