The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   what dash clusters will fit a 77? (https://67-72chevytrucks.com/vboard/showthread.php?t=281550)

DESTRO 03-04-2008 03:52 PM

what dash clusters will fit a 77?
 
Hello all,
I was wondering which dash clusters I could use on my 77??
Mine finally went out.From what I gathered so far I know I can't use a 73-75 and there looks to be something different for 76-77.I'm confused.
All I want to work is the speedo and the gas gauge. i'm not concerned about the others since I have aftermarket ones.Will 80-87 work since those seem more abundant??
Also has anyone had their speedo bounce and make a bell ringing sound??
[I thought my gremlin took up music]
Thanks in advance

dooce 03-04-2008 06:18 PM

Re: what dash clusters will fit a 77?
 
it needs to have a volt gauge and mechanical oil pressure gauge. only found on 76-77. All this according to this website:

http://73-87.com/7387garage/interior...achometers.htm

im not sure if a speedo and gas gauge from a different year would work or not though. I dont think it would because of the circuit on the back. I have a 76 and am looking at buying a tach cluster

Quote:

Originally Posted by DESTRO (Post 2608661)
Hello all,
I was wondering which dash clusters I could use on my 77??
Mine finally went out.From what I gathered so far I know I can't use a 73-75 and there looks to be something different for 76-77.I'm confused.
All I want to work is the speedo and the gas gauge. i'm not concerned about the others since I have aftermarket ones.Will 80-87 work since those seem more abundant??
Also has anyone had their speedo bounce and make a bell ringing sound??
[I thought my gremlin took up music]
Thanks in advance


DESTRO 03-05-2008 10:11 AM

Re: what dash clusters will fit a 77?
 
Is the problem just because of the volt and oil gauge? I'm not even going to hook those up.
Has anyone swapped in a newer cluster in an older truck? The pic on that site for a 77 cluster doesnt look like the same font as mine for the #'s. I'm gonna have to check that out.[maybe I have a newer one in there now??] All I need is the fuel and speedo to work.

dooce 03-05-2008 06:05 PM

Re: what dash clusters will fit a 77?
 
Im not sure. Like I said, all i know is what is on that website. I am pretty sure it is the 73-87 website guy that knows alot about these things. maybe he can chime in.

IDIDNTDOIT 03-05-2008 06:30 PM

Re: what dash clusters will fit a 77?
 
HI, the needle bouncing and bell ringing sound sounds like maybe a bad speedo cable where it binds and then lets go, binds and then lets go... it will bounce the needle all over and can make a dinging. It will do it to the next one too if that is what it is.

Hope it helps...

Bill

DESTRO 03-06-2008 10:45 AM

Re: what dash clusters will fit a 77?
 
I just put in a new speedo cable in and it's still bounceing. Mainly over bumps in the road.Needle keeps hanging up too.


All times are GMT -4. The time now is 10:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com